Can you let air out with tire gauge?

Download Article

Índice Show

References
About This Article
Did this article help you?
Does checking tire pressure let air out?
How do I let pressure out of my tire?
How do you let air out of tires at a gas station?
How long does it take to let air out of tire?

Download Article

If your tires are overfilled with air or you need to transport them, you may want to deflate them. Both vehicle tires and bike tires have valves located in them that control the flow of air in and out of the tire. Once you find the valve stem, letting the air out of them is a breeze as long as you follow the right steps.

1
Locate the valve on your tires.[1] The valve is usually found between the spokes near the middle of your tire. The valve stem should look like a short 1–2 inches (2.5–5.1 cm) tube protruding from your tires. It will usually have a black or metal cap on the end of the stem.[2]
- The cap on the stem keeps dirt and dust off your valve.
2
Rotate the cap on the valve counterclockwise to remove it. Removing the cap on the valve will reveal the metallic part of the valve. The valve looks like a round hole with a pin in the center of it.[3]
- Once you remove the cap, put it safely aside in a plastic bag so you don't lose it.
Advertisement
3
Check the pressure on your tires. Attach a pressure gauge onto the valve on your tires and screw it into place. It should give you a readout for your tire pressure in pounds per square inch, or PSI. Check the owner's manual to see what the recommended pressure should be.[4]
- You can purchase a tire pressure gauge at an automotive store or online.
4
Press the tip of a screwdriver on the metal pin. There will be a thin metal pin in the center of the valve. You can also use a pair of needle-nose pliers or another small, thin tool. Air will start to shoot out of the valve when you apply pressure to the pin.[5][6]
- Lift the screwdriver off of the pin to stop it from deflating.
5
Jack your car up if you're completely deflating your tires. Completely deflating a car or truck tires without jacking up the vehicle can damage your rotors and tires. Find the jack point on the side of the vehicle and use the lever to jack the car up into the air. You can then completely remove the air from the tire safely.
- Read the owner's manual if you're unsure of how to jack up your particular model of car.
6
Unscrew the metal pin to deflate the vehicle tire faster. Use a pair of thin, 5 inches (13 cm) long needle nose pliers and turn the metal pin inside of the valve counterclockwise. Your tires will lose air in a quicker flow than if you just pressed down on the pin. Use this method if you want to deflate your tires quickly.[7]
- Set the metal pin aside in a plastic bag so you don't misplace it.
- Remember to screw the pin back into the valve once you're done.

1
Loosen the cap on the end of the valve. The valve will look like a long stem protruding from your tire. On the end of the stem, there will be a cylindrical cap. Turn the cap counterclockwise until the cap is loose, but don't remove it completely.[8]
2
Fit the end of your tire pump onto your tire. You can usually find the recommended pounds of pressure, or PSI, for your bike tires on the inner part of the tire. Press the end of the tire pump hose onto the end of the valve after you loosen it. Flip the lever on the backside of the tire pump and read the gauge on the pump to see what the pressure level is in your tires. If they are overfilled, you should release some air from them.[9]
3

Remove the tire pump from the valve to deflate the tire. If your tire is overfilled and you want to deflate it, you'll need to remove the pump first. Flip the switch on the back of the pump to the up position and wiggle the pump off the valve.
4
Press down on the tip of the valve to deflate the tire. Pressing down on the cap once it's loose will release the air from the tire. You should hear and feel the air shoot out of the valve as you press down on the valve cap.[10]
5
Push down on the tire to remove the air more quickly. If you want to remove the air from the tire quicker, place it on the ground and push down on it. This will shoot the air out of your tires faster than if you just pressed down on the valve cap.[11]

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

References

About This Article

Article SummaryX

To let air out of a tire, start by removing the cap from the valve located on the side of your tire between the spokes. Next, use the tip of a screwdriver to push in the thin metal pin in the center of the valve and let the air rush out. Alternatively, you can use needle nose pliers to push in the pin. In order to deflate the tire even faster, use pliers to unscrew the metal pin in the valve. However, make sure to put the pin back in when you’re done! For tips on how to let air out of a bicycle tire, read on.

Did this summary help you?

Thanks to all authors for creating a page that has been read 158,265 times.

Did this article help you?

Does checking tire pressure let air out?

Place the end of the gauge over the valve and then firmly press it on. Do this quickly and evenly, to avoid losing air. There's a small stem inside the valve and the gauge pushes on this, opening the valve. Air exits the valve but only gets as far as the gauge, which measures the pressure.

How do I let pressure out of my tire?

Using the back end of the air gauge push the metal pin in the center of the valve stem down to release some of the air in the tire. You should do this in bursts and check the remaining pressure regularly.

How do you let air out of tires at a gas station?

Press the end of the tire pump hose onto the end of the valve after you loosen it. Flip the lever on the backside of the tire pump and read the gauge on the pump to see what the pressure level is in your tires. If they are overfilled, you should release some air from them.

How long does it take to let air out of tire?

It exits the tire at the rate of 1-3 psi per month. The exact air loss is usually determined by the model and make of the tire. Different rubber blends provide different rates of permeation. About 1-3 psi per month is normal for air loss, but you still should check inflation rates often, and re-inflate your tires.