Water Heater Installation- How Long Should It Take?
June 26, 2012
Is it Time for a New Water Heater?
Dealing with plumbing issues is never convenient. Toilets don’t consult us when they decide to back up. And leaks. Don’t get me started on leaks! They always show up at the most inconvenient times, don’t they? But water heaters take the winner’s trophy for annoying situations. Cold shower anyone? Fortunately, scheduling a water heater installation is fast and painless.
You’ll need to make a few decisions prior to the water heater installation. Since most water heating systems last from 10-15 years, chances are you aren’t aware of the newer, more energy-efficient systems on the market. Ranging from 50-gallons to tankless, today’s systems give homeowners more options than ever. Ask a Sinclair plumber to suggest different systems to fit your household’s needs. Installations time, costs and energy usage vary between systems so being informed will ultimately save you time and money.
Typically, a licensed plumber should have your new tank installed and working within 2-3 hours barring unforeseen complications. A reputable plumbing company will respect your busy schedule by arriving on time, working at a steady pace and cleaning up as needed.
Here’s a breakdown of the basic water heater replacement process:
- Remove old water heater (45-60 minutes). As easy as this sounds, there’s really several steps that need to be taken to ensure safe removal -disconnecting the power source, draining the tank, disconnecting the water supply lines and the actual removal of the tank.
- Position new heater in place (approximately 30 minutes). Bringing in the new tank, removing from the box and maneuvering it into place takes a bit of time.
- Connecting the system (45-60 minutes). Once in place, the tank needs to be connected to the water and power sources. This might take a bit longer if it’s a gas unit. After the water heater installation, the plumber will test it and adjust the settings. Ask about basic system maintenance and how you can do simple adjustments on your own.
Scheduling with a licensed plumber will get your hot showers back in no time at all. For service in the Lubbock area, call Sinclair Heating, Cooling, Plumbing, Inc at (806) 454-9332.
A water heater installation can be done by anyone, but if you’re a first-timer, it can be a nerve-wracking experience. Most systems take about 30 minutes to install. The length of the process depends on the type of water heater and the person who is installing it. For experienced do-it-yourselfers, this task can be relatively quick. However, if you’re a do-it-yourself newbie, the installation process may take much longer.
Water heater installation requires a plumber to remove the old one and connect the new one. Depending on the complexity of the new unit, it may take between 45 minutes to an hour to complete. A gas water heater will take a plumber around thirty to sixty minutes to install. During this time, a plumber will make any adjustments necessary for optimal operation. The total installation time can range anywhere from four to six hours.
The process of installing a water heater can take 45 minutes to an hour. Disassembling the old tank and removing the old water heater is a major part of the process. While the process may take an hour or more, you should plan on an average of two to three hours for the entire project. This time frame includes the time it takes the plumber to disconnect the old water heater from its electrical connections.
Adding a new water heater is an ambitious project. However, with the right information and the right tools, installing a new one is a breeze. It should take you no more than four hours. If you’re a novice, you should be able to complete the job on your own in about four hours. And remember that you’ll need to follow all local building codes and plumbing codes.
Once you’ve purchased and installed the water heater, you’ll need to connect the power source and the water source. Then, you’ll need to test the unit to ensure it works properly. It shouldn’t take more than an hour to install a water heater, so you’ll want to be sure to plan ahead. After all, you don’t want to waste money by doing it yourself, and you’ll be glad you did.
The installation of a water heater can be tricky. You need to turn off the water supply, drain the tank, and disconnect the power source. Then, you need to replace the water heater’s discharge tube. The replacement of the water tank will take less than an hour, but it will need to be installed by a professional. After the removal of the old one, you can now install a new one. If you hire a plumbing company to do the job, they should be able to accommodate your busy schedule.
The installation of a water heater is a difficult process, but you can get it done without a problem. Before starting the installation, it’s important to disconnect the power and the water supply. Once you’ve done this, it should take no longer than an hour to install a new water heater. If you’re an experienced plumber, you can choose a brand from a wide range of options and save money on installation.
After you’ve removed the old water heater, it’s time to install the new one. Before doing this, make sure the drain pan is clean and free from damage. Then, follow the instructions carefully to ensure a perfect installation. Your new water heater should take approximately four hours to complete. So, depending on your needs and skills, you may have to hire a plumbing service. If you don’t have a professional plumber, you can hire a service to do it for you.
The time it takes to install a water heater varies depending on which system you have. If you’re replacing a water tank with a new tank, the installation will take less time than a tankless system. While it may require additional construction time, a plumber should be able to install a new water heater in a few hours. A licensed plumber will be able to finish the job quickly and will work around your schedule.