Australians purchase around 240 million aerosols every year but in 2014 more than one in every two people wrongly believe aerosols can't be recycled. They can be!
Aerosol cans are used to package and dispense a vast array of liquid products - from deodorants and hair spray to cooking oil and whipped cream.
This is a directory listing. Please be aware that recyclers may currently be closed or operating shortened hours due to COVID-19. Please use the below information to contact the recycler directly and adhere to the COVID-19 restrictions in your area.
Aerosol Cans
About Aerosol Can Recycling
- More than 80% of Australians live in councils that collect aerosols for recycling.
- Empty, intact aerosol cans can be safely recycled along with other metal packaging.
- Aerosols are made from either steel or aluminium, which are infinitely recyclable in Australia.
- Aerosols are used in the bathroom, kitchen, laundry, shed and garage so remember to recycle them from all over the house.
- If the aerosol can isn't empty, it should be disposed of through your council's hazardous waste program.
WARNING!
Butane aerosol cans or canisters such as those used for camping should NOT be put in the kerbside recycling they are highly flammable if any gas is remaining in them. It's best practice to keep them out of the kerbside bin and dispose of them at your local household chemical drop-off service.
Related Documents and Links
- Aluminium Cans
- Steel Cans
Bushwalking gear and paraphernalia. Electronic gadget topics (inc. GPS, PLB, chargers) belong in the 'Techno Babble' sub-forum.
Forum rules
TIP: The online Bushwalk Inventory System can help bushwalkers with a variety of bushwalk planning tasks, including: Manage which items they take bushwalking so that they do not forget anything they might need,
plan meals for their walks, and automatically compile food/fuel shopping lists (lists of consumables) required to make and cook the meals for each walk. It is particularly useful for planning for groups who share food or other items, but is also useful for individual walkers.
Gas canister disposal
I was just wondering what you do with empty gas canisters - do you just throw them in the bin or is there somewhere to drop them off for recycling?
JaxterNothofagus gunniiRe: Gas canister disposal
They will take them at recycling depots, however, the place you purchased them from is supposed to take them back (tis written somewhere..)
Respect Wilderness!
NutsLagarostrobos franklinii
Re: Gas canister disposal
Our local recycler in Adelaide said they will not accept them due to the OHS risks in handling them. They are to be dealt with by a special collection which includes pressue packs (spray paint & the like), this advice is now 2 years old and so maybe out of date. I've heard similiar positions elsewhere in Oz. As for the retailer accepting the empties back, ho ho ho.
wander Phyllocladus aspleniifoliusRe: Gas canister disposal
Take a church key to them. Once opened to the air it's hard for any recycler to honestly say they are risky.
OrionAthrotaxis selaginoidesRe: Gas canister disposal
Yer... well, we are talking about tassie (?). Iv'e left them with the guys at the tip before (they actually give our dog a treat if he comes along...) and I also returned around 50 to the local retailer last week... They arent something that are dealt with every day so I guess some may need educating
So whats the 'special collection' wander? Has your cylinder been sitting in the shed waiting for the last couple of years
Respect Wilderness!
NutsLagarostrobos franklinii
Re: Gas canister disposal
Our local council runs a special collection each year
where you can deliver on a set date for your suburb your old paint, batteries, ewaste, chemicals and the like for them to dispose of as a bulk deal once their collection is complete. There is a very small charge based on what you deliver.
I do not use the canisters for a few reasons. One is the environmental costs of the canister process compared the pet bottle process for liquid fuel.
I was under the impression the official Tassie collection point for canisters was at Melaleuca.
There always seems to be a couple of doz stacked in the shelves of the huts there.
Re: Gas canister disposal
There is a Tas Wide Service by the name of Chem Safe
Homes Tasmania which is free check out //www.lgat.tas.gov.au it runs to the end of March 2010.
They will accept empty Gas cannisters as well as other other chemicals you want rid of including old paint.
I also believe that you can leave them at the local Transfer Stations in Tassie any time.
corvus
collige virgo rosas
corvusVercundus gearus-freakius
Re: Gas canister disposal
wander wrote:Our local council runs a special collection each year where you can deliver on a set date for your suburb your old paint, batteries, ewaste, chemicals and the like for them to dispose of as a bulk deal once their collection is complete. There is a very small charge based on what you deliver.
I do not use the canisters for a few reasons. One is the environmental costs of the canister process compared the pet bottle process for liquid fuel.
I guess its all relative, seems to
me that the amount of cannisters used is in proportion to the amount of 'ewaste' saved while we're out using them...
Others have shown here that they can be as efficient in use.
Iv'e heard on the grapevine that they can be refilled (though not 'legally' here in Tassie).
They are generally safer (...well... I havent set my foot alight with a gas cylinder
What other reasons?
(Good find Corvus)
Respect Wilderness!
NutsLagarostrobos franklinii
Re: Gas canister disposal
The Parks and Wildlife Service Visitors Centre at Lake St Clair will take empty cylinders. They advertise that they appreciate a donation to cover their costs of disposing them but I dropped some empties off there in January and they wouldn't accept any money.
Bruce
Re: Gas canister disposal
Thanks for your ideas everyone.
corvus wrote:There is a Tas Wide Service by the name of Chem Safe Homes Tasmania which is free check out //www.lgat.tas.gov.au it runs to the end of March 2010.
Yeah, I saw this, but it looks like you have to drop your stuff at the tip on a specific day - unfortunately I'll be away the day that it's on in Hobart.
I'll see if the camping shop I bought them from will take them back.
I don't like the waste, but I do like the control and speed of cooking with gas compared to my metho run trangia.
disposal of used fuel bottles
Can you put empty fuel cnaisters in the recycling? Do they go in the normal rubbish? I'm refering to the Kovea-type ones.
EDIT by Admin, this post was merged from a new topic into this existing one.
All good things are wild, and free.
DriftingPhyllocladus aspleniifolius
Recycling Gas Canisters
G'day all,
After looking at the Jet Boil
Crunchit I realised that the old style can /tinnie openers(church key) would work (it did)
corvus
Last edited by corvus on Tue 06 Dec, 2011 8:44 pm, edited 1 time in total.
collige virgo rosas
corvusVercundus gearus-freakius
Re: Recycling Gas Canisters
In case of doubt I mean you perforate the Canisters
corvus
collige virgo rosas
corvusVercundus gearus-freakius
Re: Recycling Gas Canisters
Yes they are not supposed to be refilled .
corvus
collige virgo rosas
corvusVercundus gearus-freakius
Re: Recycling Gas Canisters
corvus wrote:Yes they are not supposed to be refilled .
corvus
Well, true, they're not "supposed" to be refilled. Of course you're not "supposed" to put a windshield on an upright canister stove, and you're not "supposed" to ever cook inside with a bushwalking stove, but I know a lot of people who do both on a regular basis.
I have been refilling canisters for a year or more now, and it's worked very well for me. Not something to be engaged in lightly, but if one keeps a few things
in mind, I don't think it's all that dangerous. Screwing a refiller rig on to a canister of gas isn't very different than screwing on a stove. However, recall that in refilling there is no flame whereas every time you transfer gas from a canister to a stove, there is most definitely a flame.
Things to keep in mind:
- Don't overfill. Know how much the total weight of your canister should be with fuel and do not exceed that weight.
- Use good equipment. In my case, I bought a professionally made rig from Japan. My set up is not some leaky, jury rigged thing that may blow up at any time.
- Use n-butane for refilling. Most if not all canisters for bushwalking are a blend of propane and some form of butane. If 100% n-butane is used for refilling, then the pressure in the canister will always be less than what was originally in the canister. Of course, n-butane needs to be about 5C in order for there to be enough pressure in a canister to run a stove, so this is not a cold weather blend by any means.
- Don't have any sources of flame or heat anywhere near where you're refilling. Obvious, but worth stating.
- Inspect! Don't refill canisters if there are serious defects, wear, or rust.
- Establish a limit. I refill canisters 12 times. Arbitrary? Yes, but that's my "safety consciousness."
Advantages:
Cost. What I have then is a very inexpensive set of canisters for bushwalking. A cuppa? No
problem, would you like two? I get 227g in the "long" butane canisters in a four pack at a Korean market near me. Canisters made for bushwalking are about four or five times the price.
Topping off. What good is a canister that only has 15 or 20g left in it? Not much. Maybe OK for a day walk. With mine, when they get low, I just top them up. No pile of 90% used canisters laying about.
Custom filling. If I'm headed out on a trip where I'll need 250g of gas,
I don't need to bring a completely full 450g canister of gas. I can fill it to precisely the amount I think I'll need (plus whatever safety margin I feel comfortable with of course). I leave the extra 200g at home so to speak.
HJ
hikin_jimAthrotaxis cupressoides
- Website
Re: Gas canister disposal
G'day HJ welcome aboard,
I was well aware that some
do refill canisters but considered it pointless to mention this especially when it is probably beyond the capabilities or even inclination of most members who unlike us "stove freaks" only own one stove.
As a point of interest where did you source your refill rig from in Japan and how much did it cost please?
As for using up residual gas I weigh mine at the end of every trip and when they get down to less than what I consider to be my requirements for an overnighter they get relegated
to "roasting capsicums " at home over one of my el cheapo Chinese burners
Corvus
You are also not supposed to perforate them
collige virgo rosas
corvusVercundus gearus-freakius
Re: Gas canister disposal
Thank you for your welcome.
What do
you mean there are people that only own one bushwalking stove? Are you quite sure?
corvus wrote:As a point of interest where did you source your refill rig from in Japan and how much did it cost please?
I paid $43 USD for mine. I bought it from eBay seller world_wide_2009 (I think I bought it in 2009 come to think of it). I want to say that $43 was my
total including shipping at the time. I don't know if it's the current JPY-USD exchange rate or what, but the prices are quite a bit higher now. I see that three are currently available on US eBay for $53 USD each. I don't know what the JPY-AUD exchange rate is.
When I costed it out at the time, the purchase made sense. I can get four 227g
restaurant industry type butane canisters for $4.00 USD. Bushwalking specific canisters are $5.00 USD each for 110g canisters or $6.00 for 227g canisters. Plus of course there is the convenience of being able to top off, and the convenience of being able to custom fill when I don't need a full canister for a given route.
corvus wrote:You are also not supposed to perforate them
Interestingly, Jetboil is now selling a tool that does just that, perforate the canister so that they can be safely recycled. I suppose it must be safe.
HJ
hikin_jimAthrotaxis cupressoides
- Website
Re: Gas canister disposal
Hi Jim, Ive linked to your blog a few times from BPL,
welcome here.
I was reading rogers idea of pushing a nail through the valve. I'm no stove 'freak' are these cannisters aluminium? ie no spark? I was relating the story of watching a fella crush them under a dropped boulder, i imagined that wasnt the smartest move
Respect Wilderness!
NutsLagarostrobos franklinii
Re: Gas canister disposal
Thanks for that link HJ, $37.00 Buy it now price from
the same source +$9.00 postage ,may just have to have one of those because at $1.25 Au for 220g Butane it looks good against $7.95Au for 230g of Premium Blend Mix especially with my Stoves with heat exchangers that accept liquid feed.
corvus
collige virgo rosas
corvusVercundus gearus-freakius
Re: Gas canister disposal
I agree with your intital hesitation corv you would need to get the mix and weight right? Any thoughts anyone?? I did talk with another stove freak on here about refilling and was left with the impression that it perhaps needs a full explanation if any??? I'll try to find the link, I read a good discussion somewhere. Meanwhile, watch those eyebrows
Respect Wilderness!
NutsLagarostrobos franklinii
Re: Gas canister disposal
So the base ring and valve stem are steel (they rust) but im not sure of the cylinder itself, had another look and a scratch, looks like the whole thing is steel to me... guess there wouldn't be a big potential to spark but...
Respect Wilderness!
NutsLagarostrobos franklinii
Couple of videos.
Follow the instructions in these videos at your own risk.
One foot in front of the other.
michael_pAthrotaxis selaginoides
Re: Gas canister disposal
Nuts wrote:Hi Jim, Ive linked to your blog a few times from BPL, welcome here.
I was reading rogers idea of pushing a nail through the valve. I'm no stove 'freak' are these cannisters aluminium? ie no spark? I was relating the story of watching a fella crush them under a dropped boulder, i imagined that wasnt the smartest move
Thanks for the welcome.
Most canisters are steel unless you happen to have some of the old Primus ones or if you have Coleman Powermax. Personally, I'm a little bit wary of puncturing them unless I'm SURE that they're empty, and even then I'd be careful. I'd attach a stove and open the valve fully (outside, away from
flame) immediately before puncturing them.
HJ
hikin_jim Athrotaxis cupressoides
- Website
Re: Gas canister disposal
corvus wrote:Thanks for that link HJ, $37.00 Buy it now price from the same source +$9.00 postage ,may just have to have one of those because at $1.25 Au for 220g Butane it looks good against $7.95Au for 230g of Premium Blend Mix especially with my Stoves with heat exchangers that accept liquid feed.
corvus
I don't know if this is what you meant, but using 100% butane in liquid feed mode won't buy you much in cold weather. There needs to be some propane to pressurize the canister. 100% has to
be kept at least 5C, no matter if the canister is right side up or upside down.
HJ
hikin_jimAthrotaxis cupressoides
- Website
Re: Gas canister disposal
Nuts wrote:I agree with your intital hesitation corv you would need to get the mix and weight right? Any thoughts anyone?? I did talk with another stove freak on here about refilling and was left with the impression that it perhaps needs a full explanation if any??? I'll try to find the link, I read a good discussion somewhere. Meanwhile, watch those eyebrows
Filling with 100% butane to
the stated weight on the canister is no big deal. If the original blend had propane or isobutane in it, 100% butane will always have less pressure. But it will be warm weather fuel only.
If you want to add propane, which would be needed for cold weather, THAT is a whole another story. Screw up on propane, and you can have a very serious explosion. I have not yet been willing to take on that risk.
HJ
hikin_jimAthrotaxis cupressoides
- Website
Re: Gas canister disposal
hikin_jim wrote:Most canisters are steel unless you happen to have some of the old Primus ones or if you have Coleman Powermax. Personally, I'm a little bit wary of puncturing them unless I'm SURE that they're empty, and even then I'd be careful. I'd attach a stove and open the valve fully (outside, away from flame) immediately before puncturing them.
Yes, most are steel. The old square shouldered Primus cans were aluminum with steel bottoms.
I take a church key to every canister I use.
The risk of a fireball is so miniscule.
Come on, how can you refill these things and yet be nervous about puncturing an empty?
I used to crush canisters in the field with big rocks but that had a definate risk -- to my back, and to my feet.
Re: Gas canister disposal
hikin_jim wrote:Filling with 100% butane to the stated weight on the canister is no big deal. If the original blend had propane or isobutane in it, 100% butane will always have less pressure. But it will be warm weather fuel only.
If you want to add propane, which would be needed for cold weather, THAT is a whole another story. Screw up on propane, and you can have a very serious explosion. I have not yet been willing to take on that risk.
What's the volume of one of these canisters? How
much head space do they have when full?
The problem with propane (and to a lesser extent isobutane) isn't just the higher vapor pressure, but the lower density and higher thermal expansion. The canisters are designed so that the concave bottoms will invert to some extent but that only gets you so far. Boom!
Re: Gas canister disposal
Orion wrote:I take a church key to every canister I use. The risk of a fireball is so miniscule.
Come on, how can you refill these things and yet be nervous about puncturing an empty?
I've punctured canisters; I'm just careful.
HJ
hikin_jimAthrotaxis cupressoides
- Website
Re: Gas canister disposal
Orion wrote:What's the volume of one of these canisters? How much head space do they have when full?
As I recall from puncturing a canister and filling it with water, a 227g sized canister holds about 500ml of water. Can anyone confirm that? I hate to go on memory alone, but that sounds right.
I have no idea what volume within the canister is occupied by liquid and what volume is occupied by gas. I fill to the specified weight. If I fill to the specified weight, the proportions of gas and
liquid should be OK.
Orion wrote:The problem with propane (and to a lesser extent isobutane) isn't just the higher vapor pressure, but the lower density and higher thermal expansion. The canisters are designed so that the concave bottoms will invert to some extent but that only gets you so far. Boom!
Lower density and higher thermal expansion? Say more about that.
HJ
hikin_jimAthrotaxis cupressoides
- Website
Return to Equipment
Who is online
Users browsing this forum: No registered users and 24 guests