Forgot a coaster? Even diligent hosts can be prone to pesky water rings popping up days after, the moisture already lifting the wood stain to leave ghostly water stains. We spoke to Val Olivera of Val's Services for tips on how household products will remove water rings and save your furniture from needing the DIY treatment.
Vaseline
This medicine cabinet staple uses its natural oils to restore the wood from within and remove the white cast water stains leave on treated surfaces. All you need is a dust cloth to buff it out.
Spread vaseline on the water ring and leave overnight. Make sure the wood has been dusted so the oils can penetrate the surface. The next morning, wipe off the excess and buff the oils out. Clean the furniture as you normally would.
Olive Oil and Vinegar
For wood stains caused by wet glasses, you'll need a two-time solution to break down the moisture and replenish the wood's oil. Look no farther then your salad dressing. An equal part vinegar and olive oil is the perfect tag team to restore wood furniture.
Oliveira explains how to get the most from the kitchen ingredients. "Put some of this solution on a cloth and gently apply it to the stain. Make sure to wipe in the direction of the wood grain, then use a dry cloth to wipe up the excess solution and leave the furniture shining."
Toothpaste
A non-gel toothpaste has just enough abrasion to smooth over irregularities in the wood while coating the piece in a protective layer. Just spread the toothpaste over the water ring and lightly scrub with a toothbrush after a few minutes. Wipe off the excess and buff the table with a microfiber cloth to remove the water stain.
If you're finding water stains on your surfaces regularly or love to entertain, it's time to time preventative measures.
"If your wood furniture doesn’t already have a protective finish on it, I suggest applying your own. Common options are lacquer and varnish and both will provide your furniture with stronger resistance to staining," Olivera recommends.
Mary Marlowe Leverette is one of the industry's most highly-regarded housekeeping and fabric care experts, sharing her knowledge on efficient housekeeping, laundry, and textile conservation. She is also a Master Gardener with over 40 years' experience; writing for over 20 years.
Learn more about The Spruce's Editorial Process
Updated on 09/14/22
Reviewed by
Katie Berry
Reviewed by Katie Berry
- Website
Katie Berry is a cleaning expert with 30 years of household management experience and 12 years of writing about cleaning methods and routines for Housewife How-Tos. She is the author of several books about homemaking.
Learn more about The Spruce's Review Board
Fact checked by
Jessica Wrubel
Fact checked by Jessica Wrubel
Jessica Wrubel has an accomplished background as a writer and copy editor, working for various publications, newspapers and in public libraries assisting with reference, research and special projects. In addition to her journalism experience, she has been educating on health and wellness topics for over 15 years in and outside of the classroom.
Learn more about The Spruce's Editorial Process
The Spruce / Hilary Allison
In This Article
Expand
Before You Begin
White Water Stains
Dark Water Stains
Additional Steps
Project Overview
- Working Time: 10 - 30 mins
- Total Time: 15 mins - 12 hrs
- Skill Level: Beginner
- Estimated Cost: $15
Whether you've overwatered a plant, left wet boots dripping on the floor, or had a plumbing leak, removing dark water stains from wood can be a challenge. If the stain appears white, there's a good chance you can remove it. The whitened area indicates that the water has only seeped into the wax or polyurethane finish on the wood.
Dark water stains are more difficult. The moisture has penetrated the finish and seeped into the wood, causing it to darken.
With some elbow grease and patience, though, it is possible to remove both types of water stains. Here are tips and techniques for restoring your wood surface to its former beauty.
Stain TypeWater
Before You Begin
Before you start the stain removal process for either white or dark water marks, make sure the wood surface is clean and free of any dust, crumbs, or grime. A smooth, clean surface will make stain removal much easier and improve your chances of success.
The Best Wood Stains to Use in Your Next DIY Project
The 10 Best Wood Fillers of 2022
Read Now
The 11 Best Paint Brushes of 2022
Read Now
The 9 Best Paint Strippers of 2022
Read Now
What You'll Need
Equipment / Tools
White Stains
Dark Stains
- Dust mask
- Tack cloth or vacuum
- Soft cloths
- Disposable gloves
Materials
White Stains
- Mineral spirits
- #150-grit sandpaper
- Mineral oil
Dark Stains
- #100-grit sandpaper
- #150-grit sandpaper
- #0000 steel wool
- Hydrogen peroxide or chlorine bleach
- Wood varnish that matches your wood
- Wood polish
Instructions
How to Remove White Water Stains From Wood
White rings and marks indicate a superficial stain—the moisture did not fully soak through the varnish or wax. This is good news because these stains are easier to remove than their darker counterparts.
The Spruce / Sarah Lee
Get Rid of Dust and Dirt
Before you tackle the white mark, use a dust mop or vacuum to thoroughly clean the area.
The Spruce / Sarah Lee
Apply Mineral Oil
Pour a generous amount of mineral oil onto a soft cloth. Rub the white mark with the cloth, working with the grain of the wood.
Let the oil remain on the wood overnight. If the stain is gone the next morning, buff the area with a dry cloth to absorb any remaining oil. If the stain remains, move to the next step.
The Spruce / Sarah Lee
Tip
If you don't have any mineral oil on hand, you can substitute any cooking oil, mayonnaise, butter, or solid shortening. Petroleum jelly also works well in a pinch.
Apply Mineral Spirits
If the mineral oil didn't do the trick, move on to mineral spirits, a product that works as a paint thinner and solvent. Wearing nitrile gloves, since mineral spirits can soak through latex, apply some mineral spirits to a soft cloth. Following the grain of the wood, rub what remains of the white mark.
Wait a few minutes, and the stain should disappear. Finish by buffing the area with a clean, dry cloth.
The Spruce / Sarah Lee
How to Remove Dark Water Stains From Wood
Unlike white marks, dark stains are a result of water seeping through the wood's finish and into the grain. This means that you need to take a more aggressive approach to stain removal, including sanding the surface of the wood to access and eliminate the stain.
The Spruce / Sarah Lee
Sand the Stained Area
You will need to remove the wood's finish to get to the dark water stain.
- Wearing a dust mask, start by evenly sanding directly over the stained area with #100-grit sandpaper. Work following the grain of the wood while applying even pressure.
- Next, move to the #150-grit sandpaper, and sand the edges of the finish around the main stain to gradually smooth the edges.
- Finish sanding by going over the entire area with the #150-grit sandpaper and the #0000 steel wool.
- Finally, use a vacuum or tack cloth to remove all of the grit and dust from the work area.
The Spruce / Sarah Lee
Lighten the Stain
To lighten the dark staining, you can use either hydrogen peroxide or chlorine bleach, but do not mix the two chemicals.
For hydrogen peroxide, begin with a 1:1 dilution of hydrogen peroxide and water.
- Soak a white cloth in the solution, and wring lightly.
- Then, place the cloth on the dark stain, and allow it to sit for 10 minutes.
- Remove the cloth, and allow the wood to dry completely.
If the stain remains, treat again with 100 percent hydrogen peroxide for 10 minutes, and allow the wood to dry completely.
If the stain is still present, try the chlorine bleach method.
- For chlorine bleach, start with a solution of 4 parts water to 1 part bleach.
- Follow the same instructions for hydrogen peroxide.
If the stain remains after the first treatment, repeat the steps with a stronger bleach solution until the stain is gone.
The Spruce / Sarah Lee
Apply a New Finish
Once the dark water stain is lifted, use a wood varnish that matches your wood to stain and seal the area.
After the finish is dry, use the #0000 steel wool to smooth any bumps between the newly cleaned area and the old finish.
Finally, use a good wood polish to make your wood shine again.
The Spruce / Sarah Lee
Additional Steps for Handling Water Stains on Wood
Depending on the extent of the stain and damage to the wood, refinishing the floor or replacing the wood furniture might be necessary.