How to install windows 10 on new pc without usb

I wanted to clean install wiping the hard disk (removing and recreating Windows partitions). I knew from earlier experience that when clean installed, although Windows 10 usually is pretty good in finding and installing correct drivers, setup would be unable to find correct network drivers for this device (a tablet with Intel Atom CPU). These drivers would need to be manually installed after the installation. Otherwise the tablet would be just a worthless brick, a Windows device without network / Internet access, no way to add and install them and therefore unable to install rest of the drivers.

Short: I had to find a way to install without any external media, and be sure installers for network drivers would be available after installation.

This tutorial will show how to do this, how to clean install using it without any external media. Screenshots are from a simulation on a Hyper-V virtual machine but the method shown will be and work exactly the same on any PC, laptop or tablet regardless if the machine in question is UEFI / GPT or BIOS / MBR device.

This method can of course also be used even if you have DVD or USB device available as an alternative method to clean install.

The instructions might look complicated but trust me, this is an easy and straight forward procedure. I've tried to make instructions as complete as possible to be sure that any user even with limited knowledge of Windows can manage it by following the instructions to the letter.

In my case, the tablet in question I had issues with upgrading had detachable keyboard which made the reinstall possible. If your device is touch only with no keyboard this method might not work for you.

Before proceeding, test if the touch control works when device is booted to Command Prompt as told in steps 2.1 through 2.3. If touch control is not working, this method does not work for you. Do a hard reset (power off, power on) to boot back to Windows.

When it comes to installing Windows 10 on a new hard drive or on a new PC, the most recommended way on forums and Google searches is the clean install. Do you know how to install Windows 10 on a new hard drive? And how to install Windows 10 on a blank hard drive without disk or USB? This tutorial shows you three ways to install Windows 10 on a new hard drive in three ways, along with the detailed steps and screenshots of the operations. Read in-depth.

How to Install Windows 10 on a New Hard Drive by System Transfer

Installing Windows 10 on new hard drive is usually too difficult, from downloading the ISO files and burning it to the pointed hard drive for home users who don't acquire much IT knowledge. They simply don't know where to start. Then, why not take a simple way to finish the job independently?

This part introduces an easy system transfer tool - EaseUS Todo Backup to help you install Windows 10 on new hard drive without an installation CD. With the system transfer function, you can finish installing Windows 10 on an empty hard drive by backing up the Windows operating system and restoring the system image to the new hard drive in a few clicks.

EaseUS Todo Backup provides full-around options for file backup, system backup, disk/partition backup, disk clone, creating a portable Windows USB drive, and migrating Windows 10 to SSD.

Now, download EaseUS Todo Backup to use the system transfer feature to easily install Windows 10 on a new hard drive without disk.

Step 1. Create an Emergency Disk to USB

1. Connect an empty USB flash drive or external hard drive (with over than 100GB space) to your PC.

Note: Initialize the USB or external hard drive as MBR, and create two partitions: set the first partition as FAT32 and the second partition as NTFS.  

2. Run EaseUS Todo Backup and click "Tools" > "Create Emergency Disk".

3. Choose USB as the disk location to create the emergency disk and click "Create".

The bootable disk will help you boot computer and transfer system image to the new PC.

Step 2. Create System Backup Image on Source Computer

1. Click "OS" on the main page and Windows OS will be selected by default.

2. Choose the second partition of the USB drive which contains the emergency disk to save system image.

You may also save system backup image to another empty external disk (which must be equal or bigger than the system C drive).

3. Click "Backup Now" to start creating a system backup image to the target device.

Step 3. Boot Target Computer from EaseUS Todo Backup Emergency Disk

1. Eject EaseUS emergency disk and system backup image USB and connect it to the new computer.

2. Restart PC and press "DEL/F2/F10/F12" to boot into BIOS. 

3. Go to the boot menu and set the computer to boot from the EaseUS Todo Backup emergency disk.

If you want to restore the system image to a GPT disk, you need to change the boot mode to EUFI in BIOS. Then your computer will enter EaseUS Todo Backup main interface.

Step 4. Transfer System to the New Computer

Note: Restoring system image to the new computer will erase the data on the target disk. Remember to back up the files in advance or use an empty disk to restore the system image to avoid data loss.

1. On EaseUS Todo Backup main interface, click "Tools" > "System Transfer".

2. Select the system image on your USB external drive and click "OK" to continue.

3. Then click "Proceed" to start transferring the system to a new computer.

Step 5. Restart PC with transferred system

1. Enter BIOS and set computer to boot up from the drive with the transferred system.

2. Save all changes and restart your computer.

3. Update all drive drivers and programs to ensure all things will work just fine on the new computer.

It's not complicated anymore to install Windows 10 on a new hard drive with EaseUS system backup and restore software. No Windows 10 installation USB flash drive or ISO file is needed.

If you happen to meet 'system restore did not complete successfully with errors', take the fixes in the article to troubleshoot. You can also use EaseUS Todo Backup to create system image on USB drive and restore the system image from the external hard drive.

How to Install Windows 10 on a New Hard Drive with USB

If you're wondering how to install Windows 10 on a blank hard drive only with the help of a USB flash drive, read through this part and learn to create a bootable Windows 10 installation USB drive using a Windows ISO file or a Windows Setup DVD.

Preparations before installing Windows 10

  • Windows 10 install.iso file or DVD
  • A USB flash drive with at least 8GB free space
  • An idle computer where you'll format the USB flash drive
  • A Windows 10 installation USB creating tool
  • A new hard drive that you'll install Windows 10 on it

Step 1. Format the USB drive.

  • Connect the USB flash drive to your computer.
  • Right-click on the Start button and choose "Disk Management".
  • Find and right-click the USB drive partition and choose "Format". Select the FAT32 file system to be able to boot either BIOS-based or UEFI-based PCs.
  • Right-click the USB drive partition and click Mark Partition as Active.

format partition to install Windows 10 on new hard drive

Step 2. Create a Windows 10 installation USB flash drive.

How to create a Windows 10 bootable USB to install Windows 10 on a new hard drive? UltraISO (https://www.ultraiso.com/)can be helpful to burn a Windows10 DVD or ISO to the USB flash drive. Do it by following the steps below.

  • Plug the empty formatted USB drive to the computer.
  • Open and run the UltraISO tool. Select "File" > "Open" to import the ISO installation source file of the Windows 10 operating system.
  • Select "Bootable" > "Write Hard Disk Image" from the main menu. Select the USB drive you intend to boot from.
  • Click the "Write" button, and then the USB flash drive will be burned and written into the Window10 system.
  • After the burning is completed, you can use the USB as the installation disk to install Windows 10 on new hard drive.

use a tool to create Windows 10 installtion USB drive

Step 3. Install Windows 10 on a new hard drive with Windows 10 Bootable USB 

Now that you've created a Windows 10 installation USB, you can follow the steps below to install Windows 10 on a new hard drive. Connect both the bootable USB flash drive and new hard drive to your computer, ensure the two drives to be recognized.

  • Restart your computer and boot your PC from USB or DVD media. If not, you need to press a key (such as F2, F12, Delete, or Esc) immediately after you turn on your PC to open the boot menu and change the boot order. If the bootable USB drive not showing up, fix the problem instantly.  
  • Follow the on-screen instructions to install Windows 10. Note that some installation may continue after you log in, do as required.
  • After Windows 10 installation finishes, make sure you have all the necessary device drivers installed. Download EaseUS DriverHandy to update your device drivers. This tool can help you update your drivers easily with one click. There is a guide for you:

Step 1. Download EaseUS DriverHandy and click it open.

Step 2. Scan and update the target device drivers.

update the target drivers

How to Install Windows 10 on New Hard Drive with Windows Media Creation Tool

Another way to install Windows 10 on a new hard drive or new PC is by applying Windows Media Creation Tool. The overall operation can be divided into three steps, but there are still many small steps that need to be carefully completed. Read the full guide on how to install Windows 10 on a new PC with Windows Media Creation Tool.

Step 1. Download Windows 10 Media Creation Tool

Step 2. Create Windows 10 installation USB flash drive or ISO file

Step 3. Install Windows 10 on a new hard drive with the media creation tool

Install Windows 10 on New Hard Drive Summary

After reading the above, we can draw a conclusion. Although three are three ways available to install Windows 10 on new hard drive, the simplest solution is using EaseUS system transfer program.

You don't have to go through the complicated process of creating a Windows 10 installation disk. With a few clicks, you can safely and quickly transfer Windows 10 to new hard drive without reinstalling without any startup issue. Don't hesitate. Try it now.

How to Install Windows on a New Hard Drive FAQs

If you have more questions about installing Windows on a new hard drive like listed below, check the brief methods.

How do I put Windows on a new hard drive?

To put and install Windows on a new hard drive, you have three ways to figure out.

  • Method 1. Install Windows 10 on new hard drive with EaseUS system transfer utility
  • Method 2. Install Windows on a new hard drive with Windows 10 installation USB 
  • Method 3. Install Windows 10 on new hard drive with Windows Media Creation Tool

The first method is the easiest one. The other two require complex operations. You can go to each part to check details.

How do I install Windows 10 on a new SSD?

To install Windows 10 on a new SSD, you can use the system transfer feature of EaseUS Todo Backup to make it.

Step 1. Create an EaseUS Todo Backup emergency disk to USB.

Step 2. Create Windows 10 system backup image.

Step 3. Boot the computer from EaseUS Todo Backup emergency disk.

Step 4. Transfer Windows 10 to the new SSD on your computer.

How do I install Windows 10 after replacing hard drive without disk?

To install Windows 10 after replacing the hard drive without disk, you can do it by using Windows Media Creation Tool.

First, download the Windows 10 Media Creation Tool, then create Windows 10 installation media using a USB flash drive. Last, install Windows 10 to a new hard drive with USB. 

Can you install Windows on a new PC without a USB?

Of course you can do that. All you have to do is to mount the ISO file by using some software like Daemon tools or PowerISO and go to the the mounted location and then execute the file called Setup.exe. This will only work provided that you have some other version of Windows installed and running on your PC.

How do I install Windows 10 on a new hard drive without USB or disk?

Now, download EaseUS Todo Backup to use the system transfer feature to easily install Windows 10 on a new hard drive without disk..
Create an Emergency Disk to USB..
Create System Backup Image on Source Computer..
Boot Target Computer from EaseUS Todo Backup Emergency Disk..
Transfer System to the New Computer..

How do I install Windows 10 on a new computer without product key?

To install Windows 10 without a product key, click “I Don't Have a Product Key” during the installation. You won't be able to change your desktop background through the Settings app until you activate Windows 10, however. Microsoft allows anyone to download Windows 10 for free and install it without a product key.

Can I install OS without USB?

To install Ubuntu without CD/DVD or USB pendrive, follow these steps: Download Unetbootin from here. Run Unetbootin. Now, from the drop-down menu under Type: select Hard Disk.