We use cookies to give you the best possible experience. You can learn more about the cookies we use and why we use them by viewing our Privacy Policy. By continuing to use our site, you accept our use of cookies.
Accept & CloseTruth is I am still learning. After all, I am new to hunting. Relatively new to shooting compared to those who have been shooting most of their natural lives. I’m also brand new to the 6.5mm Creedmoor cartridge. With this in mind, I decided to continue my testing to see which ammo my rifle and I are able to group the best.
At the end of the day, I did make some adjustments to my testing protocol. Here is what it entailed: Shoot a group of 4 shots at 100 yards, let the barrel cool for at least 15 minutes, and repeat until the remaining 16 rounds of the ammo under test is depleted. And that’s exactly what I did with the remaining Sellier & Bellot 140 Grain 6.5mm Creedmoor Soft Point ammo. I’ll get to the results in a minute, but first let’s talk look the ammo itself.
Specifications
Bullet TypeSoft PointBullet Weight140 GrainsBallistic Coefficient0.391 G10.197 G7Sectional Density0.287Advertised Muzzle Velocity2657 FPSPrice Paid20 Rounds @ $18.00
External Ballistics
Range(yd)Drop
(in)10 mph
Wind Drift
(in)Velocity
(fps)Energy
(ft-lb)0-1.50.0265721941000.00.824331839200-4.43.722201531300-15.98.820171265400-35.816.318251036500-66.727.21649845600-110.040.91485686
Results
Taking into account the first group during the initial test, here is what I got:
- Best Group: 0.5375 inches
- Worst Group: 1.937 inches
- Average Group: 0.8915 inches
- Standard Deviation: ±0.5911 inches
Conclusions
With an average group size under 1 MOA (minute of angle) or 1″ at 100 yards, I personally would be comfortable using this ammunition for hunting medium game (~50 to ~300 lbs) out to 500 yards and big game (~300 to ~1,000 lbs) out to 300 yards with this rifle and this ammunition. Let me explain why.
As of today, I have only hunted deer which have a “vital zone” diameter of about 10 inches and don’t see that changing anytime soon. Given an average group size plus one standard deviation of roughly 1.5″, I highly confident of getting a clean hit at 100 yards. That group size will grow linearly as the distance increases to roughly 3″ at 200 yards, 4.5″ at 300 yards, 6″ at 400 yards, and 7.5″ at 500 yards. All of those group sizes at the different distances give me confidence I can accurately place a shot in a deer’s vital zone at those distances assuming I can compensate for drop and wind drift. My confidence does drop a bit beyond 200 yards because I have limited experience shooting a rifle beyond that, but that can be remedied with a some practice, taking some chronograph readings, and getting to know the true drop and drift data. Which I plan to do once I settle on my preferred factory load for this rifle.
In terms of penetration and energy, the ballistics based on the advertised velocity indicate adequate impact energy of 800+ ft-lbs for medium game at 500 yards and 1200+ ft-lbs at 300 yards. Additionally, the 140 grain 6.5mm projectile’s sectional density of 0.287 exceeds the desired sectional density of 0.200 for medium game and 0.250 for big game using a medium bore rifle. More information on matching the cartridge to the game can be found on the Chuck Hawks website.
I have a feeling the other factory hunting loads I picked up to test in this hunting rifle will yield similar conclusions, but I plan on continuing the testing in order to learn more about the 6.5mm Creedmoor platform, this rifle, and my abilities.
smarcus said:
My experience with the S&B 140 Boat Tail ammo out of my Cadex Gaurdian Lite 6.5CM, factory 24 inch barrel.
2765
2672
2704
2726
2688
2777
2704
2699
2726
2743
Easily produced sub MOA 5 shot groups (some .5 and none above .87) from 100 to 500 meters 60 degree, 10mph wind, 880 feet above sea level, low humidity. Shot 100 rounds with an Atlas Bipod, rear monopod, MK5 3.5-18 T3 and SIlencerco Omega. Hornady ELD Match 147 was a bit slower but the better BC made POI very close past 300 meters. That was all half moa or better if I did my part.
My brothers Fix shoots the S&B about 1MOA out of the factory 16 inch and Proof 20 inch barrels off an Atlas Bipod, Omeg and S&B Polar 3-12 P4 . It also shoots about the same out of our 16 inch gas guns. We paid around .55cpr delivered to PA so we bought a few thousand for banging steel.Click to expand...
100fps velocity spreads doesn't inspire confidence, and will have major effects on accuracy at long range.
For that reason the S&B ammo is a hard pass.