2014 infiniti qx60 key fob battery type

Owners of other Infiniti and Nissan vehicles such as the JX35, Q50, Q60, QX50, QX80, Pathfinder, Murano, Rogue, Armada, Kicks, Frontier, Titan, NV, NV200, 370Z, GT-R, Leaf, Maxima, Altima, Sentra and Versa might also find these DIY instructions to be helpful.

The OEM battery in the fob for this 2020 QX60 was a Maxell CR2032H.

The "H" in the CR2032H part number indicates a slightly higher capacity and discharge rate.

You should also be able to use the very common CR2032 coin cell battery, which is available from various manufacturers including Maxell, Panasonic, Sony, Duracell and Energizer.

The only tool needed to access and replace the battery is a small flat head screwdriver such as from a Jeweler's Screwdriver Set.

Keyless entry remote allow access to your car. If the key battery is dead or weak you’ll not to be able lock doors remotely. In this post, we explained how to open your key fob and replace your Infiniti key battery.

What size battery does 2014 Infiniti QX60 key fob required

• 1xCR2032 battery
• flat head screwdriver

Step by step guide

Inside of your keyless entry remote installed tiny button cell battery. Carefully try to pry apart your keyless entry remote with flat head screwdriver. Replace one CR2032 battery with flat head screwdriver.

Now it's time to install new battery in keyless entry fob's case. Battery must be installed with the same polarity as was a previous. Your key will not work if you by mistake put battery wrong way.

When the new battery installed, verify remote key fob by pressing buttons. If all functions works, assemble your fob’s body in reverse order.

At this point squeeze fob’s back cover together. Line your case two halves together and put it together by hands from top to bottom. If your fob case tightly closed, we done. If not, repeat the last step.

Video of key opening

How To Change An Infiniti Key Fob Battery-Tutorial

Still not working? Buy new one

Frequently Asked Questions

What kind of battery does a 2014 Infiniti QX60 keyless entry remote take?

Keyless entry remote of Infiniti QX60 use 1xCR2032 batteries. Most CR2032 batteries are under $6 depending on the brand, size packaging and type you buy. You can take old battery to the store, to find a proper replacement.

Does a key fob have to be reprogrammed after replacing the battery?

Remote key fob in most of cases reprogramming not needed after battery replace. If your key not working, recheck new battery voltage. Otherwise, read user's manual or contact local dealer.

Is it hard to change battery in key yourself?

Yes, you can replace battery in your 2014 Infiniti QX60 key yourself. Most difficult part is to open fob’s case. It's pretty easy with our instruction.

How much does it cost to replace a keyless entry fob's battery?

Auto repair shop's price for replace the battery in key is from 50 to 600 dollars depending on the car.

How often should remote key fob batteries be replaced?

You should replace batteries inside keyless entry remote of Infiniti QX60 at least every 3-4 years. The lifetime of battery vary on their amount of use, operating conditions and quality.

How do you know if your remote key fob needs a battery replacement?

These signs will alert you that it's probably time to replace battery in your Infiniti QX60: key fob buttons not working, signal strength reduced, multiple clicks to unlock or lock doors required and low key battery indicator on dashboard.

What kind of battery for Infiniti qx60 key fob?

What size battery do key fobs use?

What kind of battery for Infiniti qx80 key fob?