BISSELL PowerForce PowerBrush Pet replacement belt

Document

If your brush is not turning it could be due to a broken Belt or a seized Brush Roll, follow these steps to resolve:

• Turn off and unplug machine 
• Remove both tanks 

• Locate the brush access cover
• Turn machine on its side with the brush access cover facing up
• Use a Phllips-head screwdriver to remove 3 screws from brush access cover > Set screws aside 
• Remove brush access cover to expose the cogged belt and brush roll

• Remove 2 screws from brush access plate > Set screws aside 
• Remove brush access plate to expose flat pump belt
  • If belt has slipped, place back onto pulley
  • If flat pump belt is broke or damaged, a replacement should be ordered > Go to Parts & Supplies 

• Remove brush cover by pulling straight up

• Remove cogged large pump belt and check for damage
  • If damaged a replacement belt should be ordered > Go to Parts & Supplies
• Remove brush roll and clear of any obstructions or hair wraps
• Test that brush roll can spin freely
  • If brush roll is damaged or cannot spin freely, a replacement should be ordered > Go to Parts & Supplies 
• Replace flat pump belt around the red area of the large pulley 
  • Use your thumb to stretch it toward the back of the machine and transfer it to the metal axel 

• Replace cogged pump belt wrapping new belt around small metal toothed pulley
  • While wrapped around pulley, stretch and wrap around brush gear

• Has this resolved the issue?
  • Yes > Great! Glad we could get you back to cleaning! 
  • No > Contact Us

Was this answer helpful?