Can you bury an Intex above ground pool?

In this guide, we will show you everything you need to know about how to bury an intex above ground pool, so keep reading!

Below you can find out 5 different methods to bury an intex above ground pool,

• Method 1 – Install 24′ Round Intex Metal Pole Frame Swimming Pool Inground
• Method 2 – Drop Intex Pool With A Deck
• Method 3 – How To Bury An Above Ground Pool
• Method 4 – Dropping An Above Ground Pool In The Ground (The Details)
• Method 5 – Drop Intex Above Ground Pool Below Ground – 3Rd Season

Method 1 – Install 24′ Round Intex Metal Pole Frame Swimming Pool Inground

Okay guys we have everything leveled we put our bricks down after getting cool assembled inside the hole on the. Flat surface that we did get our lower spot i know you probably cant see it but that is a. Good a inches deeper probably in the center also used a i wish i had shown it but i didnt. Have time i used a big ball and i kind of rolled it made a nice little center spot for.

Water to drain and that kind of ran it in three or four locations so that the outer edge would. Drain to the center if i ever needed to drain it i just used a big i think it was. A made out of marble as a big marble ball but im not sure that to you when i get. Around on the other edge but anyhow we got everything set on that circle that we had created with a. 2×4 set it up on brick so that that like i said its stone not to worry about them sinking.

As much and its working really well we do have to adjust the legs and she fills up it really. I expect just like normal take about eight hours but im actually going to go pick up another big hose. Right off of our well in this case a water well and were going to get that filled up probably. In less than two to three so okay so like i said the bricks we used a new nylon rope. Got everything set on this edge and as you can see nice and hard and just filling up ill show.

You the tools i used is that doing the edge and then i also have this little tool that my. Father gave me years ago then once i office he wet but what we did is we watered it oh. About 10 to 15 minutes with us with a nice shower sprayer like i talked about and then we would. Let it sit for about five minutes wed go out and pack and i did that once on the edge. Did it water again to the edge again the thicker part and then i started on the center on the.

Third pack and i did the edge and then i worked did the roller so that way it was really. Hard it worked out real well we just folded up the pool brought it out to the center unfold it. Started with the upper metal ring and then holes and then we kind of got it centered and started killing. It after using a broom to knock out all the wrinkles so were definitely thats one little girl thats happy. About having her pool back up and daddys quite glad have to miss battery not have to be gassed every.

Day wheres my swimming pool shes having a heck of a fun time running around the outside edge in the. Trench well guys were say at this point were done im going to get some filtering done hopefully make some. Videos on it thats how you drop an in-text in the ground we are going to backfill it were not. Going to do that right now im going to get everything fool and then ill show you that part im. Still gonna have to working a bunch more dirt for my edge because of the caliche that we took up.

But you know the next time.

Method 2 – Drop Intex Pool With A Deck

Hey guys have you ever thought about taking your above-ground pool putting it below the surface we did just that. Recently with some help from my friend david from grass hill construction we put together a how-to video so that. You could check it out yourself so here you go dig a hole make sure to dig that hole big. Enough for your pool and lay some extra space for the retaining walls were leaving about three feet of space.

On each side of the pool so that we are ready for our retaining wall also were using a laser. Level make sure that our hole is level along the way were gonna have a pool inside of there that. Were gonna pull inside of a hole build deck although all around it so this is gonna be fun with. A pool that were installing is an intact 16 by 32 pool so our hope is about 22 by 38. Now rake the dirt to finish leveling the hole and to knock out any possible humps that there may be.

In the dirt now tamp the dirt down with a tamper or roller or whatever you prefer to you now. Ours came with a 20 by 40 foot piece of canvas and we squared our canvas and based our pool. On that lets now start putting your pool up if you have an int x rectangular pool then we have. A separate video link here to help you have a visual now begin filling it with water and making sure. To kick your sides out to get rid of any wrinkles that are in the bottom now watch out for.

Strangers because they may try to come and jump in your pool prematurely before its filled now dont forget to. Leave room near your giant hole for your lumber and supplies that hopefully your having delivered it would be easy. To forget that now start digging out your holes for your posts or the retaining walls now in our case. We use six by sixes and thats what i would recommend and of course all of our lumber is tree. Now make sure every post is level before pouring your bag of concrete in now once the corners are square.

Then stretches strain to mark the other now that the polls are set you can begin building your retaining wall. There you go thats one side completely done and we lift enough room for the legs to stretch outward as. The pool feels complete now lets get busy setting the rest of our walls and we made this space for. Our filter and we ran plumbing to the pool which you will see shortly and we chose to put on. Some thompson water seal to protect the wood and of course you can take it a step further and even.

Put up a moisture barrier if you choose to heres our sand filter that came with the pool we ran. Pvc down the inside of our retaining wall to the pool and it works exceptionally well now dont forget your. Dirt theres gonna be a lot of dirt so make sure to schedule a dump truck haul it away for. You now its time to begin your deck assembly now weve chose to do about four feet on three of. The sides and eight feet on one side of the pool so we tied in two by eights at the.

Top of our six by sixes that we already have anchored down on the ground so the deck could sit. On them but also be anchored to now all of our joists are down and looking good and we use. 6 plus 6s for our dec post and we set them on a 2 by 8 by 16 concrete cap. And we level them up and then we anchored them with galvanized screws all right its time to put the. Decking down now we use two by eights on the inside near the pool and 2 by 6s going out.

From there all right the decking is done and just in time for the ring now we are using half. Inch metal condor so want our rails so we drilled holes in two buffers to be able to insert our. Conduit into the holes and then anchor the two befores down to our 6×6 post each section goes in just. Like this any excess railing can be easily cut off with a soft all right now its time to put. The cap railing on in their case we use two by sixes for this as well all right there you.

Have it the pool and the deck are done only thing left is to sow some grass sit back and. Enjoy our new space and maybe even go first we hope you enjoyed the video dont forget to subscribe thanks. For watching.

Note – This section will be updated soon.

Method 4 – Dropping An Above Ground Pool In The Ground (The Details)

Note – This section will be updated soon.

Method 5 – Drop Intex Above Ground Pool Below Ground – 3Rd Season

Note – This section will be updated soon.

Conclusion – How To Bury An Intex Above Ground Pool

The purpose of this post is to assist people who wish to learn more about the following – above ground pool installation in ground time lapse diy project, dropping an above ground pool in the ground, the best way to vacuum an intex pool!, lower an intex pool with deck, putting an intex pool in the ground, sinking a massive bestway overground swimming pool into the ground – how to guide – summer 2020, closing and winterizing my intex ultraframe above ground pool, 8 tips for installing an intex pool (above ground pool) | swim university, intex ultra frame 16×32 pool setup, how to inexpensively winterize an intex above ground pool. intex presentation. professional how to., aboveground swimming pool dismantling and storing, 18 ft intex pool installation | intex saltwater system installation | intex pump setup, above ground pool vacuum setup | intex sand filter mod | cheap above ground pools, how to vacuum an intex above ground pool!: vinyl pool, easiest way on youtube!!, intex above ground pool setup.

Thank you for visiting Softwarediscover.com and reading this article! If you found this article useful, feel free to share it with your friends and help spread knowledge.

Can I semi bury an Intex pool?

Can you put an Intex above ground pool in the ground?

Can you turn an above ground pool into an inground pool?

How deep can you put an above ground pool in the ground?