How to dye black hair blonde without bleach

Maffew is a hairdresser, marketer, and dabbler in many things who enjoys sharing knowledge about the science of hair coloring and hair care.

Blonde Hair Dye Without Bleach

Bleach is one of the most powerful and useful products at your disposal for achieving blonde hair, but what happens if you're very sensitive to the product or you simply don't want to use it? Bleach does have its drawbacks, but luckily, it's not always necessary to use it.

If your hair is light enough, it is possible to get blonde hair without bleach. You can use a high lift dye or even regular permanent dye in many circumstances. This article will outline the different products available to achieve your dream shade of blonde.

Read on to learn how these products work. This will ensure that you know whether it will be a viable option for you based on the condition and color of your own hair.

How to Lighten Hair Without Bleach

The process of dyeing your hair blonde can be performed in one of two different ways, and the correct method for your hair is dependent on how dark your hair is and how much lighter you want it to be. You can achieve blonde using either:

• One-step process
• Two-step process

You can generally determine whether you need to use bleach or not fairly easily once you understand the differences between these two processes.

One-Step Process

A one-step process for lightening your hair to blonde entails the use of permanent hair dye or high lift dye. Technically, both of these products are similar in what they are and how they work. High lift simply contains more ammonia and other added lift boosters that enable it to work more effectively (but still significantly less ammonia than bleach).

Both of these types of dyes lighten your hair and deposit new color at the same time, allowing them to lift and tone your hair in a single step.

Double Process

A two-step process—on the other hand—entails lightening the hair separately before finally toning it to the desired shade afterward. This is generally achieved by lightening your natural color with hair bleach, then neutralizing unwanted tones like orange and yellow with a demi-permanent or permanent toner to produce a clean and natural-looking result.

This kind of treatment can produce a lot more lightening because the product used is stronger and typically left on longer. Toning is performed only once your hair is visually where it should be for the depth you want, making this the most reliable way to lift really dark hair because it's easy to see the color changing as it occurs and adjust timing and procedures.

As a simple rule of thumb, hair dye can lighten natural hair anywhere from 3–5 levels depending on a variety of factors like the initial darkness. If your hair is a darker shade of brown, expect results on the lower end of that estimate. Lighter hair will get more lift from the same product, and this is true of both dyes and bleach.

Expected Results

Blonde Developer

Using the above table and the following hair level chart you can determine how much lightening will be possible when using a specific product. It will also give you a good estimate of what shade this will take to from your initial color. Keep in mind that the darker your initial color, the less effective the products will be, so estimate lower in that situation.

If your hair has been previously colored, there will be some information and links to some of my other relevant articles a bit later to help you plan around that because it's a more difficult situation. There are a few additional steps that can help to keep your hair in good condition and make the new color easier to achieve in these situations.

Hair Depth

What to Know Before Using a Blonde Dye

You can get blonde hair without bleach by using a high lift color. However, your hair does need to meet certain criteria for this to work properly. If your hair doesn't meet these requirements, the dye will either not work at all or it will not lighten your hair all the way to blonde.

• No permanent dye should be present in your hair.
• It is most effective on hair that is no darker than light brown

While you can potentially use dye to lighten medium brown hair to a dark blonde shade, having a darker initial color puts you more at risk of an unsatisfactory result. It is highly likely that you'll be left with orange hair that will never look blonde even after substantial toning. A double-process is a more reliable option in this case, though not necessarily always mandatory.

Previously dyed hair presents problems of its own too because the color present is not only more resistant to lightening than natural pigment is but also because this dyed color doesn't replace natural pigment–it sits inside the hair cuticle in addition to your natural pigment increasing the amount of pigment present overall!

Check out this article for a more detailed look on using a high lift dye.

Light brown hair. Natural hair that is this light can be dyed blonde without bleach reliably.

Flickr

What Is High Lift Dye?

High lift dye is a somewhat special kind of permanent dye designed to be able to lighten hair more proficiently than regular dye. The main difference is that it has more ammonia and other boosters added to help open the hair cuticles and catalyze the chemical lightening process that occurs inside your hair.

Basically, it has more oomph than other blonde dyes but it is still less damaging than bleach and less likely to require a separate toning step depending on how dark your initial hair color is before application. While the product will technically lighten hair of any depth, it can leave you with an overly warm result if you're not careful.

The pigment in this kind of dye is generally anywhere from light blonde to a darker blonde. If applied to darker hair, it will still lighten properly but may not tone your hair sufficiently, necessitating the use of a separate toner afterward. This is like a less-damaging double process, and your hair can be toned using a mild semi or demi-permanent dye to further reduce the risk of damage.

Choosing a High Lift Dye

The high lift blonde dye you choose should generally be an ash tone. You may not want ash blonde hair, but the color you're using will not be the result at the end because of the way hair coloring works. An ash tone is required to neutralize all the orange and/or yellow pigment that appears as it lightens.

If you use a shade without sufficient cool pigment, you will end up with orange or yellow hair because there is nothing in the dye to deal with the warm tones that appear. You can mix a little of an ash shade into the exact shade you want to reduce its toning power or use ash dye alone for the most intense toning effect. The latter is definitely the best option if you have naturally dark hair or a lot of warmth in your hair color.

It's also important to note that high lift dye is a salon product, and you won't find it at supermarkets. Ideally, I'd recommend you use a high lift dye from a reputable salon brand. The same thing goes for regular blonde dye, too; you get better results when using a superior product. Supermarket box dyes are formulated to be weaker and are more likely to result in insufficiently lightened hair.

If you're a bit lost wading through brands, I would recommend Igora Royal 12-11 for an ash-toned high lift dye with reliable results. There are plenty of other great brands to choose from, though; just know that you get what you pay for to an extent, as with most things.

• How to Use High Lift Hair Color
  Need an explanation of how to apply and use high lift dye? Check here!

Choosing the right shade of dye is crucial to getting a great result at home.

Choosing Blonde Dye

If you don't need a high lift dye because your hair is already naturally a lighter shade—like dark blonde—you can use regular dye to get great results. This works for darker hair too, but the darker your hair is, the darker the resulting blonde will be. Hair that is too dark won't even reach blonde in one process, though this is true of high lift and sometimes even bleach too, unfortunately.

When choosing a dye for this purpose, the same rule applies to a high lift: use an ash shade to deal with warm tones. You also need to put a bit more work into your choice of shade though because, unlike high lift where the focus is lightening, a regular dye can deposit anything from an unnoticeable amount of pigment to a surprising amount depending on the depth of your hair and the level of dye used.

For a general rule that fits most people, choose a level of dye that is one level lighter than the shade you anticipate to reach and that contains ash tone. Using this rule, if you were planning to go from a dark blonde to a light blonde, you would use a 9A shade to lower the risk of over-toning. For an intense ash result, use the exact level you want to reach instead.

Hair Porosity

While the one-level-lighter rule will work for most people, other factors like your hair porosity can make your hair absorb more or less of any dye. Knowing how your own hair tends to react to dye is helpful beforehand. If your hair tends to absolutely soak up color, choose a shade that is another level lighter to be on the safe side.

If it's pretty resistant, you may need to go with a darker shade. Still, the amount of ammonia present in blonde dyes generally makes your hair quite receptive to color, and resistance is less likely than the first potential problem. Adjust accordingly, and you'll avoid either of these problems.

Need more information on general dye application procedures?

What About Other Alternatives?

Options for lightening hair are appreciably limited because the natural melanin pigments in your hair are incredibly resilient molecules. Bleach and dyes use a powerful chemical process called oxidation which alters the physical structure of melanin in your hair, rendering it colorless in the process.

While oxidation is beneficial for lightening hair, it also produces an unwanted side effect by gradually damaging your hair at the same time. This is because the keratin protein that your hair is made out of is also susceptible to the same reaction that lightens your hair.

Given that lightening hair and damage go hand in hand, it's tempting to find another option. Unfortunately, anything that achieves an appreciable amount of lightening carries at least a small amount of damage with it because the only processes capable of harming melanin also harm keratin.

With that said, it's important to address some of the more notorious alternative methods touted as hair lighteners because while some of them may produce a little lightening, none should be used on dark hair. Some of these methods include:

• Lemon Juice: This just doesn't work, creating an acidic environment actually seals the hair shaft shut, rendering it more resistant to oxidation because chemical lighteners have more trouble penetrating your hair. Conditioners are actually acidic for this reason. They act to close the hair back up after shampooing and make it feel silky smooth.
• Honey: Do you want ants? Pretty sure that's how you get ants. Honey does have some very mild lightening properties, but it's not enough to transform dark hair into blonde even if you apply it every day.
• Chamomile: It's thought to be good for sleep, but it's not for hair. Well, to be fair, it might help the condition of your hair and can leave your hair smelling nice if you like the scent of chamomile. Any lightening effect is very mild at best.

None of these things will lighten your hair to blonde because none of them have any appreciable bleaching effect. A good rule of thumb is that if you can safely eat or drink something, it's not going to lighten your hair.

There is one natural product that lightens hair, and just about any other thing exposed to it, though, and that is the sun. Sunlight contains UV radiation which wreaks havoc on hair, skin, and textiles alike.

While it functions slightly differently from peroxide, there is a commonality present in that UV damages the melanin in your hair as well as the keratin, which is why people who spend a lot of time in the sun develop natural highlights but can also experience more dryness and breakages too.

Using a balayage technique can help create multi-dimensional darker blonde shades that match your features.

Do you need advice to dye your hair blonde? Leave a question in the comments below for tailored advice and share your insight with other readers.

Related Blonde Articles

• How to Dye Hair Blonde
  The process of dyeing hair blonde from any color.
• How to Tone Blonde Hair
  If you have blonde hair, it needs to be toned to keep it looking nice. Find out how!
• How to Bleach Hair
  If you need to use bleach, you need to use it correctly. Discover the right procedure and safety to properly lighten hair with it!

This content is accurate and true to the best of the author’s knowledge and is not meant to substitute for formal and individualized advice from a qualified professional.

© 2014 Maffew James

Melinda on May 05, 2020:

I wish to die my dark roots blond I used clairol root touchup and my roots turned red:(

Vanessa from California on May 14, 2019:

My natural hair color is Auburn butbi have been coloring it with Feria R68 and using Artic fox vegan color for about 2 years. The color has gotten very dark and patchy also it doesnt seem to keep the grey patch in the dront of my hair coverd. How do i remove this color back xlosest to my natural color but safely? My hair does not do well with bleach.

Mary Lembi on October 09, 2018:

What do I do with semi white hair and slate greyhair?

MeLeah on July 28, 2018:

I have a semi permanent color on my hair and it's a dark brown wanting to go back to my natural color of dirty blonde

Uday Patel from Jabalpur, MP, India on June 21, 2018:

In India people use Henna a natural herb powder to colour their hair. The result is robust red tone but I do not know if it can be mixed with modern dyes to accord varied shades of colour?

elaine on June 19, 2018:

i habe drak Bowrn hair can i die my hair blound if i do what closer will it trun

Amy Roy on June 06, 2018:

If you have a lightish' darkish natural hair color would the blond hair dye still work with out bleaching your hair ???

Roberta on March 11, 2018:

I recently dyed my hair Carmel blonde that had a reddish tone. I want to get rid of the reddish tone and change it to a lighter shade of blonde. What should I do?

ALHARA on February 25, 2018:

HI, I HAVE DARK BROWN HAIR, NOT WITH RED TONE, NOT BLACK THOUGH. I HAVE BEEN TRYING TO GET TO A LIGHT TO MED BROWN, NO HIGHLIGHTS AN LEARNED THE HARD WAY, USING BLONDE CAUSES ORANGE HAIR. IS THERE ANYTHING HIGH LIFT WISE I CAN USE ON DYED HAIR, LIGHT ASH VROWN NICE/EASY GIVES ME DARK BROWN, THAT WILL GIVE ME A LIGHTER BROWN...MID TO LIGHT WITH NO RED. THANK YOU, ALHARA.

Annamaria on February 16, 2018:

I can not use bleach as each time I have my hair breaks off especially around hairline and falls out!! I now have grey hair and would like a natural looking cream, sandy blonde

Thank you

Annamaria

Anita on January 04, 2018:

I have a hair color between a 6 and 7 can I use a high lift color

jac on November 19, 2017:

My hair has turned white on the front of my hair like a three inch band right around from ear to ear. It's. A beautiful color. At a salon they were going to color the back platinum to match my white natural color. My hair turned brassy. What can I do. Btw my natural color from my youth is a dark brown. Help.

CJ on September 25, 2017:

Thank you, very useful information for those attempting to lighten their hair with professional quality products.

Amy M. on August 17, 2017:

I recently stripped out my dark brown dye with color oops. I then used wella 9N with 40 vol hoping to make it a nice shade of blonde. It was brassy so I put on wella t28 toner and left it in for 10 mins. It didn't make much of a difference. Would it be okay if I now used a highlift blonde on my already dyed blonde hair. Will it lift it to the shade I'd like or will it still be brassy? I wanted to use Argan one and only in shade highlift cool blonde. Thanks for any help, I'm nervous.

Dee on August 09, 2017:

My hair is normally a medium brown, I recently highlighted my hair a carmel brown which I love, due to having so much grey. My roots are very grey now. I usually do the touch up in between salon visits but I'm wondering since my hair is so grey can I color my roots a dark blond without bleaching or using a high lift dye? I usually schwartskoff 7-0 & 7-4, but I want to go to an 8. Is that possible without bleach?

Chris on July 31, 2017:

Hi there! I need to dye my orange hair again but noticed last time that my highlights were getting damaged. How can I highlight again with out going over highlights??

Samantha on July 01, 2017:

I've used Sun-In, will that effect how well a high lift dye will work?

Jemma Sarah Irons on June 17, 2017:

How do you dye your hair?

Hannah on June 05, 2017:

hey, my hair is naturally auburn, would i still be able to die it blonde in this way?

john on June 04, 2017:

My hair is ashy light brown, my biggest fear doing this is getting my hair golden blond which would be terrible on me. How big is the risk of getting my hair golden and how to reduce risk of it happening?

DoeEyedFaun on May 25, 2017:

Can you use a bleach cap (or a series of bleach caps) to strip any remaining color, and gradually lighten my hair, then go in with a highlift color?

Chrysa Mae Jagualing on April 16, 2017:

How can I achieve ash blonde without using bleach in my hair color now?

Tinkerbell96 on February 27, 2017:

I was wondering how a dish water blonde could achive a white blonde color once they have coloured their hair ultra lite blonde. It turned orange.

Michelle on February 01, 2017:

Do you need bleach to clour grey hair blonde?

Autumn on January 26, 2017:

After reading this article I have a few questions, I know you said you can dye the hair with Matrix SoColor UL-AA or other brands right ? I dyed my hair blond and it came out very light brown but brassy, because I have very dark black asian hair..and I never wanted to bleach it on my own. So can I still use high lift to correct it lighter or should I try purple shampoo?! Please help!

Lucia on January 21, 2017:

I dyed my hair medium burgundy and used high lift but it just didn't make my hair blonde just made the color lighter what should I do lighten it?

Limitia on January 05, 2017:

My hair is black, I used a burgundy treatment around the middle of Nov or Dec it didn't take so today Jan 4 I tried honey blonde did everything right my hair BARELY turned to a semi little brownish color more on my roots that colored. How can I take it to a lighter color that can be seen with out having the light our sun hitting it. Please help I'm African American my hair is thick and no chemicals other than that dye

Emsie on January 03, 2017:

Hi,

Great article! So my hair has been over processed and damaged with bleach. I don't want to lose my blond - roots are already 4 months long and I'm starting to get restless waiting for the virgin hair to grow out. My question is: could I use a high lift tint on the roots only and kind of merge it in? Or would it be a disaster if any of it hit the top of the bleached parts? Thanks in advance!

Brianna on December 27, 2016:

What if your hair is dyed a brown

Nafisa on December 17, 2016:

Is it safe to think that using blonde dye on black hair without using bleach or high lift, would produce the color light brown? I mean if that's what I want.

Niangboi on December 09, 2016:

I dyed my hair black seven months ago and now I want light blonde. Will I get the perfect light blonde at the first dye? I don't want to use bleach.

Zocara on December 02, 2016:

please help.... I have curly mousy blonde hair with lots of grey in the middle. I have relocated to another country and want to do my own hair at home. I find that my hair goes orange when I have been to an hair salon. Please give me step by step instructions on what to purchase in order to get a nice natural blonde look.

Thank you kindly

Louiee on November 24, 2016:

I bleached my hair and dyed it burgundy. I want to go back to blonde. Will the burgundy prevent me from going blonde?

Cassandra on October 06, 2016:

I've had violet peekaboos put in and now that it's dyed out to a pinky whitish color I want to go with a medium blonde peekaboo. Do I just use the box dye over the old color or do I need to bleach it first? I am a first timer doing this on my own.

gena on September 29, 2016:

Can i put a high lift dye over ALREADY highlighted hair (that has been bleached with 40 Vol./Loreal Quick Blue powder bleach)??

Charlotte on September 05, 2016:

I had my hair dark brown but had res in it from my previous colour before my dark hair. I want to go blonde, I had my hair stripped then bleached or high lifted. Could I go blonde in the same day or would I have to do it in stages? As I and my family thought I would come home blonde but I'm a copper colour ?

Charlotte

Ginger on August 18, 2016:

Hi,

I've never dyed my gingery, orange, red hair before. I love my hair color but I'm looking for a change in the form of a very light pastel purple. However, I was wondering if I could do this without bleaching and with a semi permanent dye? I have no idea if this exists but I would love to know if it does. I just want to make sure that my natural hair color is not permanently changed.

Ashley on August 09, 2016:

I have put a red rinse does that make my hair able to color without bleach

Shazz on August 03, 2016:

Hi

How can I achive level 6 to level 11 with high lift. I always use 10.01(wella, Fuge, or Matrix) with 9% but always comes out yellow or gingery and on there is try to use tone T01 from Fuge but doesn't really work. What can I do any advice please?

zoe on August 03, 2016:

Hi just wondering if you can help My hair is in very bad condition due to long term bleaching ive recently dyed it dark brown want it bk blonde but don't want to bleach it how can i get it back blonde without my hair breaking off anymore

Sara on June 27, 2016:

Hi dear! I have ?? I bleached my hair twice and toned it with wella t18 I wanted to have an ombre look where only my ends r the lightest but the result was not good it turned very orange and brassy lookin I hated to the point I wanted to color it black it looks really nice on me but I didn't wanna give up since I have done all of this. I had someone comin to my house to actually fix it but it turned horribly orange after she bleached it again with 40 volume.. Then I taught bout the black again then I said to my self I'm sure there is something I can do to fix it please help me do I need to just tone it and what's the right toner? Or do I have to bleach it again I have done the bleach 3 times so far !! I just want nice blond not tooo blond I like my ends to be lighter then my roots. I have colored my hair a lot black but my roots r dark brown my ends I guess r black. Please help me correct this I appreciate it sooo much

Paige on June 26, 2016:

Okay, quick question. Everytime i bleach my hair, there are orange spots that come with it. if i use the color lift will it still make that orange tone? I am a natural blonde but have dyed my hair several times & i just want my natura hair color back!

Jeza on June 05, 2016:

I want to color/dye my hair but idk what color will fit my tan skin

Reyna on May 24, 2016:

I have dark brown almost black hair. I did the mistake of only using a hi lift shade UL-PA socolor from matrix thinking i would get ashy hair. Boy was i wrong and i wish i had seen this before! Well my hair is now light orange!!! Please help me what can i do now? I didnt use bleach only the hi lift. I really hope you get back to me.

Reyna on May 24, 2016:

Hello i have a question and need your help

Shelia on May 22, 2016:

I use Socolor HDRV And have been for about 6 yrs . I have I short asymmetrical cut but I have the hardest time getting blonde highlights when I try during the summer months. I know it's bc I use so much red. But I use Wella/40 vol wen I try & suggestions ?

Berenice on May 12, 2016:

I want to dye my hair aburn. My hair is black right now but I don't want to use bleach is there any what I can make it lighter

Hailey J. on May 09, 2016:

Hi, I'm a light blonde. My hair when I was little was naturally almost white. I want my hair to be a few tones lighter, but I don't want to damage my hair in the process. Help!

Shelby on April 21, 2016:

I bleached my hair twice over two weeks then used a toner. Right now it's like a honey blonde maybe a little darker in spots (with some orange/brassy). I want to know if I can tone it again or if I should use a semi permanent hair dye like wella. I'm going for a really light blonde. Overall my hair is pretty healthy, except for a few spots that get stretchy when wet but I figured I could leave those out.

Any advice helps

Thanks

LesleyxO29 on January 25, 2016:

I want to dye my hair without bleach i tried it once amd it came like light brown can you give me advice

Maffew James (author) on January 18, 2016:

Hi ThatGirl,

Bleach is much more effective on dyed hair because dye struggles to lift artificial pigment. In this sense, a high lift dye won't make much of a difference to the level, but you'll still suffer all the damage from the dye because the damage is a side effect of the way the product works. Even if little lift occurs, you still get the same amount of damage as if more significant lightening had been achieved.

The best thing to do at this point would be to tone temporarily using a semi-permanent dye in 7A to get your hair to look a nice medium blonde, and then really focus on protein treatments and giving your hair the time it needs to recover strength before you go any further. Eventually if it is strong enough, you may be able to bleach with a low volume of developer or as a bleach wash to take it a little further, very carefully, but only if the condition improves.

ThatGirl on January 14, 2016:

Oook...so I'm officially that crazy person that wanted to bleach at home. Bleach hair with a history of dark dyes....

Of course, im paying for it dearly, rather my hair is paying. It's damaged. Ive been babying it. Protein treatments and deep conditions every other night. It is currently at the gold level and I need to lift at least 2 more levels. I was advised by a rep at Sallys to use the hilift dye by loreal. Ash blonde. Will that dye get me the next two levels of lift? I can't bleach again. I've bleached 3 times in a week and my hair is holding on, but hates me. I need to be as close to platinum as possible with the least amount of damage...pleeeaaassseee help??

Ema Micheal on November 10, 2015:

I've light brown hair and I havent dyed it before. I really want to get my hair platinum blonde but without using bleach or causing any damage to my hair. I literally have no experience and know nothing about hair dyes.

Please help me to get my hair platinum blonde at home and without much damage. I've read the page but I didn't really get everything.

If you would kindly tell me what hair products I need to use to get my hair done

Yuri on November 02, 2015:

I had blonde highlights and a caramel base color for a few years then recently I decided to go red for Fall. I got it done professionally and the color was nice but I didn't like it on me. So I got impatient and bought a box hair dye in the color expresso black and applied it to my hair. I think I had it like that for 1 month and I couldn't stand it.. I washed my hair a lot and just recently did 2 applications of color fix and ended up with a pretty strawberry light brown/blonde hair, just a bit too brassy. Can I use a hi lift blonde color to lighten 1 shade or 2 and tone it? I don't want my hair to re oxidize and turn dark again. Any input would be helpful. Thanks :)

Bridget on October 15, 2015:

I have my hair dyed a natural level 4/5 brown (stylist called it semi-perm) right now, and an under layer that was bleached and colored with a couple blues. Now, my hair is faded and I reaallyy want to dye it a dark red mahogany, fading into a blonde-gold.. My hair is a bit damaged, but I'm taking much better care of it and will wait a couple more weeks before I do anything...

However what can you recommend to me that will be the best for what I want? Least damaging and high quality, but still affordable..Looking forward to your (professional?) opinion! Thanks! (:

Haley on October 04, 2015:

Okay so I am a natural Strawberry blonde and I died my hair red and it faded fairly quickly. It was box dye, i just wanted to try it. Then about 5 months later I went from like a pink to black with box dye but now my blonde roots are back and its now an auburn brown color with this work if I wanna go back to blonde?

Lauren on September 22, 2015:

Hi, i have my roots bleached in a salon every 8 weeks and then have a 001 silver toner (fudge) put on which takes out any unwanted yellow/orangey tones... My hair is not in the best condition now but I still want to keep this colour! Can I use fudge permanent high lift colour on my roots then the 001 silver toner to still get the white colour I want? My natural colour is ginger... I'd say sort of between a 6.34/7.34 in the fudge colours

Maffew James (author) on August 19, 2015:

Hi Brianne,

I apologise for the lateness of my reply. The amount of lightening you get is largely determined by whether you've dyed it before, what shades you've used, and how many times it was dyed; as well as how dark it is.

The short answer is that at a reddish orange colour, your hair is probably about a level 4 - 5, and high lift can take this to a darker shade of blonde (No platinum or light shades are likely though as it's not usually strong enough for that when used on hair this dark).

Whether it can do this will depend on what has been done to your hair in the past though. If you've applied any dark colours like brown shades (Light, medium, or dark brown), or black, this will reduce the lift of a high lift dye because every dye you apply to your hair adds artificial colour that can not be removed very well by use of another dye. You can still see lightening because any natural pigment in your hair will still lift, but this lift is often minimal if there is a lot of dye pigment present.

To sum everything up, if you've dyed it with darker colours, or you've dyed it a few times, bleach will be more reliable and the better option for lightening it. Otherwise, feel free to use a high lift but keep in mind that you may need to tone separately with another dye afterwards. The high lift can lighten your darker hair, but it won't tone properly in this situation because the dye pigment isn't strong enough to cover the darker warmth.

Brianne on August 11, 2015:

My hair is a reddish orange color, would I be able to use a high lift on my hair?

Maffew James (author) on August 01, 2015:

Hi Crystal,

Gloss shouldn't lighten, but if it was a demi-permanent of permanent gloss, this will be mixed with developer, which can produce lightening, although it's not the intended effect with a gloss. If a high volume of developer was used, this will lighten more drastically without any colour deposit because the gloss contains almost no pigment.

It's also possible the product used was a lightener though. Lightening extract, for example, is mixed into other shades in some brands to increase lift, or can be used by itself like bleach. It's basically the same thing as a blonde dye, except without the actual colour pigment and more ammonia, so it could be used as a lightening gloss.

Crystal on July 27, 2015:

I have a question. About a year ago I wanted to take my very dark brown (dyed from mix of gray and medium brown). My colorist started to apply a "clear gloss/glaze" after doing my root touch up each time. I have it touched up every three weeks. I am now blonde. No bleach was used. I don't have virgin hair so,why did this work and what's in it? Is there a developer in the gloss?

Maffew James (author) on July 11, 2015:

Hi Elizabeth,

With all that dye buildup, it's very very unlikely you'll see any lightening from the use of another dye. You could use dye remover to try and strip it out, but I wouldn't recommend this either because of how long you've been dyeing it. Any dye that is stripped out will be patchy and you won't get it to blonde this way.

Overall, the best way to get to blonde will be to bleach it to slightly lighter than the level of blonde you want and then tone. For a light blonde at level 8 for example, this would mean bleaching to lighter than level 8 before toning. The reason for this is because toning will darken your hair slightly as colour is added to neutralise the colour you don't want to be visible.

The colour you use to tone will depend on what warm tones are present: If there's still a lot of red tone, use green ash mixed into a natural shade. If it's more of an orange colour, use blue-based ash. If it looks yellow, which isn't likely with all that red dye present; use violet. Eg, if your hair looked bright reddish orange after bleaching and you were using Wella Koleston, this could be toned to blonde using a combination of natural blonde (/0 shades), and matte blonde (/2 green based ash).

How this all turns out is dependent on the bleaching, and the more evenly you can apply bleach, the better it will lighten, and the less likely it will end up patchy. After that, there are ways to even out hair that does end up patchy from bleaching without having to dye it substantially darker.

Elizabeth Joanne on July 09, 2015:

Hello I have dyes my hair for more than 7 years and a majority of the colors I've used are dark reds. From box dyes I want to change my hair to blonde and I was wondering if you could give me a list of everything I would need to get from Sallys beauty supply ? I have tried bleaching in the past and it's gotten me an orange and yellow mess of hair

Maffew James (author) on July 03, 2015:

Hi Violet,

If you're happy with the lift and it's just that warmth developing over time that worries you, the best option is to tone in-between dyeing. This will keep your colour cooler for longer, but without causing additional damage. Indola P.1 or P.01 are good options for this if you're staying with the Indola brand.

Alternatively, a good violet shampoo may be all you need. You can wash your hair with a product like Fudge Violet Shampoo either every time you wash it, a few times a week, or intermittently with your regular shampoo to maintain a cooler shade and eliminate yellow and gold tones from your hair.

I like to recommend the Fudge Violet because it's concentrated and reliable, but it's perfectly fine to use other brands; just make sure that the shampoo you use is strong enough to effectively tone your hair. The darker your hair is, or the ashier you want it to be, the stronger the shampoo needs to be to affect the colour. Vice versa, when maintaining lighter blonde hair that is showing yellow or gold tones, you may want to use a weaker shampoo or dilute it down with a white shampoo so that your hair doesn't over-tone or become too ashy.

Violet on June 29, 2015:

Hi matter,

I've been using the indola 1000.1 for many years, & getting foils in my hair every few months to counteract the gold, but still find my hair gold in between foils, I was thinking of using the igora with a high lift as I like the level of light I'm getting just want more of a ash blonde, what your recommendation.

Thanks

Maffew James (author) on June 19, 2015:

Hi Bella,

With long hair like yours, the biggest problem can be unevenness, so the quicker and more consistently you apply dye, the better the results are going to be. Damage shouldn't be a major problem because your hair is already close to blonde and you won't need to lighten it too much.

There are two different ways you can go about this process:

1. High lift blonde dye, such as the Wella Koleston 12/ dyes.

This kind of dye is permanent dye that has a higher ammonia content and is mixed with 40 vol developer to push as much lightening as possible without using bleach powder. It won't work as effectively on hair that has already been dyed, especially if your hair has been dyed darker colours like brown shades in the past.

To use this method, you will need high lift dye in an ash shade, eg, Wella Koleston 12/1 or whatever brand you prefer, mix that with 40 vol as the developer, apply to lengths about an inch away from your scalp (To avoid hot roots from the increased lightening here), and process for about 10 minutes or so. After that, apply to the root area and process until it has lightened as far as you want it to lighten, or the maximum processing time has been reached.

Using high lift dye, the ash tone present is going to help counteract the warmth while it lightens, but you may still have to tone separately afterwards if it still looks too brassy.

2. Bleach

Bleach is more reliable but slightly more damaging than dye. To do it this way, mix bleach powder with 20 vol developer and apply lengths first for 10 minutes, then to roots and continue processing. Lighten to a gold-orange for dark blonde (Mostly gold with a tinge of orange), to gold for medium blonde, to yellow for light blonde, to light yellow for very light blonde, or to pale yellow for platinum.

Following this, use an ash tone dye one level lighter than the level you bleached to for toning. For example, if you bleached to gold for a medium blonde result, tone with light ash blonde. After application, remove the dye when you're happy with the colour. For a very cool or very ashy result, tone for longer or apply ash at the same level as the colour you want.

Ideally, for the most natural looking colour, you may want to stick to shades that are light, medium, or dark blonde overall as very light shades don't look as natural unless you have pale skin. As for the tone you aim for, match that to your skin tone and it will look more natural. IE, if you have a warm skin tone, choose darker shades and go for beige or golden blonde. If you have cooler skin, go for neutral or ash.

Let me know if you need any further clarification, and good luck with your colour!

Bella on June 17, 2015:

Dear Maffew,

I've previously died my hair once or twice with the ion color dyes, and have used those hair lighteners you get at the store (I live in Switzerland and I don't know if they had bleach or not I think they were high lift dye). They worked on my hair but only lifted it 1-2 shades lighter not to mention I got highlights (very small ones) last December. My hair is a natural light brown but gets lighter at the ends for some reason (naturally I don't know why). And I would like to go to a natural blonde. My hair is very long (about to the end of my ribs) and in healthy condition. I really want to keep the length. Do you have any tips how I could go to this shade of blonde a healthy way with a good natural-looking out come? Thanks!

Maffew James (author) on June 08, 2015:

Hi Terra,

Lightening potential decreases with the more times your hair has been dyed, so another dye is going to have less of an effect. In the case of darker dye, this can prevent any lightening at all, but if you've only used that high lift, you'll likely be able to take it a little further with another dye, but do keep in mind that it may not lift as well as you hope.

To do this, either use another high lift if your hair is in good condition, or a blonde dye at level 9 or 10 with 30 or 40 vol as the developer. The regular blonde dye is less damaging, even when using 40 vol as the developer, but it will produce less lightening. You can use an ash tone to help deal with any yellow tones that are showing, but it tends to be easier to focus on lightening and tone separately if there is any warmth that needs to be neutralised. Follow the high lift or blonde dye up with a demi-permanent ash dye as the toner if you need additional toning after lightening.

Terra on June 06, 2015:

Hello. I applied a high lift blonde to my hair and it's still not as light as I want it. I am a natural dirty blonde but want to be more platinum. I want to avoid bleach at all cost as my hair is very fine. Could I re apply the high lift blonde again to get to that platinum stage? What would you recommend? It's only a few stages darker than what Im wanting. I want really white. I also have some gold in it that I want to go. What should I do?

Maffew James (author) on April 01, 2015:

Good luck with your colour Sara, and let me know if you have any problems with it.

Sara on April 01, 2015:

This information is priceless! Thank you again for your assistance to this high priority matter! I just ordered from amazon prime and because of your kindness i will be all ready for the weekend ;-)

Maffew James (author) on April 01, 2015:

Hi Sara,

Bleach can be powder, paste, or oil based, but powder is most common and most effective. It's a combination of oxidants, which lighten your hair, with conditioning agents and other caring ingredients to help offset any damage.

Developer, which is hydrogen peroxide, is added to both dye and bleach. Used in dye, the ammonia in the dye opens the hair cuticle and allows the mixture to penetrate; peroxide then develops the colour as well as lightens natural pigment. Used in bleach, it has a similar effect but the lightening is supported by other oxidants which have a much stronger effect. Dye can only be made so strong, at which point bleach is more effective if you need better lightening.

As for those brands, with Goldwell you can use Oxycur Platin or Silk Lift. With Matrix you can use V-Light, Light Master, or Logics. Regardless of what you're using it needs to be mixed with developer and I'd recommend going no higher than 20 vol for this. You don't need a super strong formula to get it the rest of the way to blonde.

Apply that to your roots only and lift until it's just slightly lighter than your lengths. You need it to be slightly lighter because toning will darken it slightly. This way it matches the lengths much more accurately after toning.

To tone it, use an ash blonde dye that is one level lighter for soft ash or warmer results, or use an ash blonde dye at the level of your hair for a more intense cool ash result. Eg, if your lengths are light blonde (Level 8), use very light ash blonde dye (9A), to tone your roots. If you want a more intense ash, tone with 8A instead in this example.

As with the bleaching, apply this dye to your roots only and allow this to process until it matches your lengths closely, and then apply all over for the last few minutes to get a more even result.

For touching up roots as they grow in, apply bleach to roots only, and then do the same thing for toning. As it grows out you won't be overlapping it every time you retouch because you're keeping it to the roots. The lengths just require occasional toning with a temporary toner if they start to look too brassy.

Sara on April 01, 2015:

I cannot thank you enough for the excellent direction you provided. I do have a follow up question...when you state to apply bleach with 20 volume developer what is considered bleach? I am looking at goldwell and matrix products and so confused! Have not done this in years so please excuse my lack of knowledge and memory here :-)Also, once I successfully achieve the blonde color I desire, should I be mixing ash and ultra blonde color dye with the developer or is this a 2 step process? Lastly, would I just touch up roots as needed? I want to keep the integrity of my hair as much as possible!

Maffew James (author) on April 01, 2015:

Hi Sara,

The dark brown is much too dark to be lightened effectively with a high lift. It's best to use them on lighter hair for a blonde result, or you can use them as you did for a lighter brown from darker hair.

As for correcting it, toning will neutralise the orange, which will take it to about a light brown colour. Whilst this gets rid of the unwanted orange tone, it does nothing for the fact that the colour is still much too dark to match. At this point, the best way to fix the roots now that they've been dyed already is to apply bleach with 20 vol as the developer, lighten to slightly lighter than your lengths, and then tone with the appropriate ash blonde toner to finish it off.

Onto your other questions: you should definitely lighten the roots the rest of the way before you apply any more dye to them. The more dye you apply, the less effective anything you use to lighten it will be afterward. As for mixing Goldwell developer with Matrix dyes, that's perfectly fine. All developer is just hydrogen peroxide in the end. Each brand tends to formulate their own developer in a way that it is the perfect consistency to mix in with their own dyes, but it will still work fine with a different brand. Just don't mix two dyes from different brands; that's a different case altogether.

sara on March 31, 2015:

Hello,

I attempted to dye my dark brown roots and already lightened hair (had some low lights in it from the winter) with goldwell 12 BN and 40 volume developer. Roots came out orange however rest of hair lightened nicely. How can I correct it and should I just get a toner for the roots? I used to use Matrix and mixed an ultra light blonde with an ash blonde but forget the mixture. I also thought they had a toner I may be able to use on my roots. I have to put baby powder or dry shampoo on my orange roots for now ;-( also, how long should I wait between coloring and should I only dye to roots once the orange is corrected? Also, can I mix a 40 volume goldwell developer with a matrix color? Or would I have to purchase a goldwell color? Thank you in advance for your help. I just want a nice light blonde without brass or orange!

Maffew James (author) on March 25, 2015:

Hi Nat,

Definitely try Wella Koleston 12/11, Igora Royal 12-11, Indola 1000.11, or Matrix UL-AA. Mixed with 40 vol developer, you should be able to get close to platinum on a level 6 or lighter base with any of these. Of Course, this all depends on what you can actually get.

Maffew James (author) on March 25, 2015:

Hi China,

This isn't too unusual to see. When you apply blue on top of hair that contains too much yellow or gold tone, it looks blue to begin with as the dye is still intense. As it fades with washing though, the amount of blue tone in your hair decreases and the remaining blue blends with the yellow in your hair to look green.

As for getting orange or yellow out of your hair, you need to use ash dye to add the correct complementary tone into your hair to cancel out the appearance of the colour you don't want. It's the same sort of process that's happening with the blue and yellow, except when two complementary colours mix, they actually form a neutral result. In this case, the complementary tone for yellow is violet, and blue is the complementary tone for orange. You'll get the best toning results if you use an ash blonde dye that is violet-blue based.

nat on March 23, 2015:

Im a natural base 6/7 at the moment i have white bleached blonde hair painted on all over i want to stop using bleach! I still want to be a light ash blonde but i want to be more of a highlighted blonde...what high lift tints would you recommend to use

china on March 23, 2015:

Hello I use Korea high lift lighted blonde with a 40 developer... for my newgrowth ... and color my hair indigo blue from adore... my roots instantly after first wash go green!!!! Help please I tried bleach too the blue one and didn't lift enough to get rid of the orange and yellow brassyness

Maffew James (author) on February 10, 2015:

Hi Heidi,

I'd advise against using a high lift for this purpose as they are an alternative to bleach, but they're not gentle. They do cause less damage, but they're still more damaging than a regular dye. If you only want 1 - 3 levels of lift I'd recommend using a regular dye.

Going on the fact that you like the dark gold colour from the sun-streaking, would you like a dark golden blonde result, or something lighter than that?

Heidi on February 10, 2015:

Howdy- I took a medication (a PPI) that wound up having the unexpected unwanted side effect of both hair loss and weakening. After more than a year off of both the meda and all hair treatments (last of old highlights cut off) I've got all-virgin light brown hair that is kind of mousey but in sunlight has a lot of red and gold. To avoid any more weakening I'd like to try the high lift but seriously want to avoid 1) brassy and 2) red (red on me is awful). My natural tendency (when I'm lucky enough to spend time at the beach) is to lighten in streaks- I turn a natural dark gold and that's what I'd like to try for. I want to avoid yellow and don't want to go more than a few shades lighter Can you suggest a good lift that will avoid the red/orange/brass and a post-lift toner should the lift leave me too brassy? Thanks up front!

Maffew James (author) on February 08, 2015:

Hi Nikki,

The best option is to bleach the darker hair to even it out and then tone as intended. You should only need to apply the bleach for about 20 minutes at this point to get that hair to the same level.

The reason a high lift isn't the best option in this case is because you've used dye to tone it. There's no guarantee that it would lift with the artificial colour in your hair now. It's also overkill for the results you want to achieve. High lift dye contains a lot of ammonia and is mixed with 40 vol developer. For the small amount of lightening that's left to be accomplished you'll actually get less damage using bleach.

Nikki on February 08, 2015:

Hi,

So I went to a salon and got my ends bleached because I wanted ombré and it turned out a nice yellowish blonde and then they used a toner on me that made it a light blonde. I went back the best week and got the rest of my hair bleached because I didn't want the ombré anymore and the top of my hair turned out that yellowy blonde , the bottom wasn't bleached because it was already at my desired color, and the rest of my hair turned out orangeish. I waited about a week with orange hair and then I tried to use a toner with a blue and purple base to get rid of the Orange and pale yellow tones . It took out the yellow, but not the Orange . I wanted to know f I could use this lifting dye on just the Orange parts to get them to that pale yellow color so that I can re tone my hair again to get to my desired color ? Would that work???

Maffew James (author) on January 28, 2015:

Hi Wes,

I've never used UL-A+. It appears to be equivalent to UL-A.

The disparate shades could be a matter of location. Wella tends to do this kind of thing too where they release slightly different shades in different countries. If in doubt, go with your hairdresser's recommendation once they see your hair and know what they're working with. It can always be toned separately if the ash high lift used isn't strong enough.

As for the regrowth, I'd recommend trying Igora's Expert Mousses in either 9.5-1 or 8-1. You can use these as often as necessary as they are semi-permanent and don't damage the hair. 9.5-1 is pastel ash while 8-1 is a light ash blonde - use whichever is strong enough to effectively give you enough cool tone to keep it looking the way you want. You could also use a good blonde shampoo like Fudge Violet and that's often enough to never need toning at all.

Wes4020 on January 27, 2015:

Thanks so much for your advice. Yes the Matrix colour gives me a lovely blonde. I have since found another hairdresser who uses Matrix so I have cancelled the other appointment and will go with the colour I know. I'm not sure if my previous colourist used a ULA or UL-AA. She wrote it down as ULA+. Could you please advise how much ash the UL-AA would throw opposed to the regular ULA? I do have a problem with my hair getting more gold about 3 weeks after the colour and when the regrowth starts to appear.

Maffew James (author) on January 27, 2015:

Hi Wes,

What level did the Matrix lift to? Did it actually take you to a blonde colour, or were you using it to achieve a lighter brown?

In any case, Indola is an excellent brand and their high lifts offer great lightening. The lift is about the same as both Matrix and Igora when using 40 vol. The pearl high lift is a different colour to Matrix's ash tone however. Indola 1000.22 pearl blonde has a base that is mostly violet with some blue tone, whilst Matrix UL-A is a heavier blue-violet. You won't get the exact same shade using it and it likely will lead to some brassiness because it's not as strong in tone.

It'd be better to use Indola 1000.1 for this purpose to replace Matrix UL-A as the two are a more similar base tone and colour result. Matrix also has a UL-AA which is a stronger ash though, so be aware if you were using that one, you should substitute with Indola 1000.11 instead for the most similar colour.

Wes4020 on January 26, 2015:

I've moved state and finding it difficult to get the same hair colour. I have dark brown hair and I used to have the matrix high lift tint in and Ultra light Ash + 40 vol. Personally I found this to be a great colour as there was never any brassiness . The hairdresser in my new area uses the Indola colour in a Pearl blonde and I was advised that the results with that brand are better. Would like to know if the Indola brand is really better as I've previously had problems with brassiness and would like to avoid this at all costs..

Maffew James (author) on January 24, 2015:

Hi Cofee Mommy,

Thinner hair is more prone to noticeable damage because there's less of it. Normally, thicker hair that is somewhat damaged won't show it so noticeably because if you end up with split ends or breakage, it's a much smaller fraction of your hair. Less hair means damage is more visible.

As for the coconut masque, conditioning agents like this will help keep your hair from drying out too much during bleaching and thus reduce damage, but not by much. Protein treatments are a better way to actually reverse damage as they repair the protein that your hair is made out of. Conditioners can't do this; they can only alleviate dryness and make your hair feel softer and nicer.

Natalia M Aeschliman on January 22, 2015:

This is a great article! I shaved my head back in September, and now its in a pixie stage. I wanted to bleach it again to platinum, but recently I got a hair cut to shape it a bit, and she used thinning shears, and I was wondering if bleaching it will make those ends more prone to damage??

I have bleached it before, but I am so impatient that I do it all at once and end up with really damage hair. This time, because my hair is so short, I will take my time in order to get it platinum and not have to shave my head again!

Also, is it true that making a hair masque with coconut oil will help protect the hair while bleaching it??

Maffew James (author) on January 22, 2015:

Hi again Natalia,

You're using the right shade and the right volume of developer. Given that it's only part of your hair that isn't lightening properly, I think that's probably key to solving the problem. Are these areas applied to last, or perhaps less product is applied there?

If that's the case, you can always try getting someone to help you apply the dye so that it is applied to all your hair much more quickly and see if that helps produce a more even colour. Or if possible, you could rinse those areas out last.

If that still doesn't help, it's possible those sections of hair are naturally more resistant to lightening. You might want to try using a stronger high lift like the ones available in the Igora Royal or Wella Koleston brands to increase the likelihood it lifts properly.

Natalia Lipari on January 19, 2015:

Hey! For some reason I didn't see this until now, but I use Age Beautiful hair dye. The shade is High Lift Ash Blonde. I use a 40 volume developer. Thank you for taking the time out of your day to respond to me! :)

Maffew James (author) on January 18, 2015:

Hi Tiff,

Natural blonde, one level lighter than what your hair is. This would mean that if you lightened your hair to a level 8 yellow colour, you would tone with a 9N for a golden result. If it was a level 7 though, you would be using an 8N for toning. Lighten to the level that you want and tone like this.

For the toner, permanent is superior to a semi because it will last significantly longer and produce a more natural result. I'd recommend a brand like Wella Koleston or Igora Royal, but most brands will work. Only develop until it is the desired shade. Leaving on for longer will move towards more of a neutral and then ashy tone.

As for the bleach bath; probably not a good idea. A bleach bath is best for stripping out dye, subtle lightening, or correcting hair colour. It lifts quick and effectively, but it doesn't lift much. It won't usually be able to take dark brown hair to blonde and isn't the best way to do it. A regular bleaching is more reliable and effective for this.

Tiff on January 18, 2015:

Thank you so much for responding. So to make sure I'm understanding this because my hair is dark brown, i need to leave the bleach in until it turns to the yfellow color. When finished I need to apply a toner 1 level lighter than my hair to achieve the golden blonde look? Oh and how do you feel about a bleach bath? And what toner would you recommend for me, permanent or semi permanent preferably, that I can purchase from somewhere like sally beauty shop.

Maffew James (author) on January 17, 2015:

Hi Tiff,

When lightening your hair, warmth is inevitable. Underneath the colour you see, there is a rich warm base tone which gives your colour its depth. In dark hair, this is a copper to deep red colour. It's only once your hair is bleached that the cool tones are lifted out first and you start to see this warm base tone.

To dye it blonde, you'll need to reach the yellow stage, where copper tones are no longer present and your hair is predominantly golden. After this, cool tone is added back into your hair to neutralise some of that unwanted warmth and give you the colour you actually want. For a golden blonde shade, you wouldn't be neutralising too much gold, but you do need to soften it a little or the colour looks unnatural.

As for your own hair, given how dark it is, you'll need to use bleach to lift your roots light enough. As you left a comment on my how to bleach hair article, you would have read about how to apply and use it. If you look at the base tones chart in that article, you will be able to see what your hair will look like at each level as it lightens.

To tone it after you've bleached it, match the colour to the yellow on that chart to see what level it is. Once you know that, use a natural tone, one level lighter than your current level. This will neutralise some of the yellow and give you a softer, more natural golden blonde result. You only need to leave the dye in as long as it takes to reach the colour you want, and you can use anything from a semi-permanent to permanent dye for this.

The type of dye used will determine how long it lasts before fading becomes noticeable. If fading is a problem, a good blonde shampoo should keep it looking pristine without having to go to any extra effort to tone it regularly.

Tiff on January 16, 2015:

So I have a question. My roots are a very dark brown and mu ends are a golden blonde. I am ultimately aiming for a honey blonde color. Basically, how do I go about bleaching/dying my hair without it pulling orange or golden as it has the tendency to do so!

Maffew James (author) on January 15, 2015:

Hi Yara,

Use medium ash brown with 30 vol developer. I'd recommend Wella Koleston, Matrix SoColor, or Igora Royal.

Keep in mind that black hair can be hard to lighten and pre-lightening with bleach is sometimes a more reliable method depending on how resistant your own hair is.

yara on January 15, 2015:

I want medium brown but I don't want to bleach so should I get a light brown or ash blond for my hair what kind and brand do u suggest palete revlon or L'Oréal ??

Thanks in advance

ps my hair is almost black

Maffew James (author) on January 13, 2015:

Hi Yara,

You need to use brown dye for a brown result, not blonde dye. Blonde dye doesn't contain enough colour to tone your hair as it lightens. Would you prefer a medium brown or light brown?

yara on January 11, 2015:

My hair is curly and thin its very dark brown .I haven't died it before.so if I use a blonde dye will it change my hair to brown and will it really damage it .what brand and shade should I use ??

Maffew James (author) on January 10, 2015:

The percentage means he's adding peroxide developer to it. If you heard 12% or 40 vol, it's very likely high lift is involved because that strength isn't generally used for anything else. Otherwise, it's definitely bleach of some kind.

The purple colour would indicate Wella Magma, although there are a handful of purple developers available that when mixed with bleach would give a purple colour. Neither bleach nor high lift is generally foamy, but it's possible he added shampoo to it. Shampoo would cause the foam and is used in combination with mixed bleach to create a bleach bath.

In any case, it has to be either high lift or bleach because there's nothing else available. When you really break it down to its most basic form, the lightening produced from either product is a result of the hydrogen peroxide content. The main difference is that high lift deposits colour and contains conditioning agents, whilst bleach doesn't. Bleach also contains ingredients like persulfates which actually break down into hydrogen peroxide, so the concentration of actual oxidant in bleach is higher than high lift because the peroxide content is higher.

Based on this, and the fact that a high lift dye probably isn't strong enough for use on your hair if you are indeed getting platinum results from it, it has to be bleach. Whether it is a bleach bath, wella magma, or he's mixing the bleach with something else entirely...it's hard to tell.

Bleach isn't actually all that damaging if used properly. Hair that is bleached once and isn't dyed excessively, permed, or had been previously coloured, usually won't show any signs of damage. It's only when it's used incorrectly or on over-processed hair that it causes significant damage.

As an alternative, you could always try a high lift first. I'd recommend Igora Royal 12.11, mixed with 40 vol developer. Add 25% E-0 lightening booster, and a dash of 0-99 violet concentrate for extra lightening and toning power applied to roots. If you try a strand test with this and it takes your hair to platinum, you could use a high lift. If it doesn't, you have to use bleach. It would also rule out high lift dye as your hairdresser's tool because this formula is pretty much the strongest non-bleach lightener possible. If it doesn't lift as much, he had to have been using bleach.

Can you dye black hair blonde without bleach?

Can you put blonde hair dye on black hair?

How can I go from black hair to blonde without damaging it?

How can I bleach my black hair without bleach?