How to remove the red filter light on samsung refrigerator

“I’ve already changed the water filter. But the filter light on the display remains red.”

Usually, the filter light should turn back to normal after changing the water filter.

But if it doesn’t, you have to reset it.

Worry not, because resetting the filter light on a Samsung refrigerator is easy-peasy.

You just have to click a few buttons, and you’re done! That being said…

Continue reading to discover:

• 5 practical tips for maintaining your Samsung refrigerator.
• What the colors on the Samsung fridge filter light mean.
• 7 simple ways to reset the filter light depending on the fridge model.
• And a lot more…

Contents

• How do I reset the filter light on a Samsung refrigerator?
• 7 ways to reset the filter light on a Samsung refrigerator
  • #1: Press and hold the “Alarm” button
  • #2: Press and hold the “Energy Saver” button 
  • #3: Press and hold the “Water” button 
  • #4: Press and hold the “Ice Type/Water” button
  • #5: Press and hold the “Crushed Ice” button 
  • #6: Press and hold the “Ice Maker” button
  • #7: Press and hold the “Fridge” and “Power Cool” buttons
• How the Samsung filter indicator works
• 5 tips to maintain your Samsung refrigerator
  • #1: Change the water filter every 3 to 6 months
  • #2: Clean the water dispenser
  • #3: Defrost the freezer once in 1 to 2 weeks
  • #4: Vacuum the condenser coils
  • #5: Replace the door seal if necessary

To reset the filter light on a Samsung refrigerator, press the multi-function button(s) for about 3 seconds or until the light goes off. Depending on your fridge model, the multi-function button can be the “Alarm,” “Energy Saver,” “Water,” “Crushed Ice,” or “Ice Maker” button. 

7 ways to reset the filter light on a Samsung refrigerator

#1: Press and hold the “Alarm” button

To reset the filter light on Samsung fridges, locate the multi-function button on the display panel.

Typically, it has a “Filter reset (3 sec)” or “Hold for 3 sec to reset filter” label under it. So, you shouldn’t have a hard time locating it.

Depending on your fridge model, this button can vary.

But in most Samsung fridges today, the multi-function button is the “ALARM” button.

So, if the ALARM button on your fridge has a “filter reset” label, follow the steps below…

Press and hold the ALARM button until the light goes off. This can take about 3 seconds.

This method applies to the following Samsung refrigerators:

• RF28HFEDBSR.
• RF26J7510SR/AA.
• RF24FSEDBSR/AA.
• Similar 3-door French door models. 
• Similar 4-door French door models.

#2: Press and hold the “Energy Saver” button 

The multi-function button in other French door fridge models is the “ENERGY SAVER” button.

For such models, here’s how to reset the filter light:

Press and hold the ENERGY SAVER button for 3 seconds. Or until the light goes off.

This method applies to:

• RF265BEAESR/AA.
• ‎RF28JBEDBSG/AA.
• Similar 3-door French door models. 
• Similar 4-door French door models.

#3: Press and hold the “Water” button 

“How about for side-by-side Samsung fridges?”

Good thing you asked…

Because most side-by-side fridge models have a different multi-function button.

For this type of model, the multi-function button is usually the “WATER” button on the dispenser.

To reset the filter light on it:

Press and hold the WATER dispenser button for about 3 seconds. After that, the filter light indicator should turn off.

This method applies to the following:

• RS265TDRS.
• Most side-by-side fridge models.

#4: Press and hold the “Ice Type/Water” button

For other 3-door French door fridges with water and ice dispensers, the multi-function button is the “ICE TYPE/WATER” button.

And you can reset its filter light by:

Pressing and holding the ICE TYPE/WATER button on the display panel for 3 seconds. Or until the filter light indicator goes off.

You can apply this method to the following:

• RF263BEAESR.
• Similar 3-door French door models.

#5: Press and hold the “Crushed Ice” button 

If you have a 4-door Flex refrigerator, the multi-function button is the “CRUSHED ICE” button.

It’s on the display panel, right above the ice and water dispenser.

Here’s how you can reset its filter light:

Press and hold the CRUSHED ICE button for about 3 seconds.

Doing this will turn off the filter light indicator. And remove the water filter message on the display panel.

This method works with the following:

• RF28R7351SG.
• RF23J9011SR/AA.
• RF23J9011SG/AA.
• RF28K9070SR/AA.
• Similar 4-door Flex fridge models.
• Other 4-door French door models.

#6: Press and hold the “Ice Maker” button

In some Samsung French door fridges, you can reset the filter light using their internal controls.

For this model type, the multi-function button is the “ICE MAKER” button.

To reset its filter light indicator:

1. Open the fridge door.
2. Locate the internal controls, usually on the right side.
3. Press and hold the ICE MAKER button for about 3 seconds.

This reset method works with:

• RF28R7201SR.
• Similar French door models with internal controls.

You can also watch this instructional video to learn more:

#7: Press and hold the “Fridge” and “Power Cool” buttons

Can’t find the correct method for your fridge yet? 

Don’t worry. I have one more method to share. *winks*

This particular method applies to most Samsung fridge models that have internal controls.

Unlike the abovementioned methods, you have to press 2 buttons on it.

Here’s how to reset its filter light:

1. Open your fridge door.
2. Locate the internal controls, usually at the top or at the side.
3. Press and hold the FRIDGE and POWER COOL buttons simultaneously.
4. Hold them for about 3 seconds. Or until the filter light goes off.

This 2-button method applies to:

• RF260/BEAESR/AA.
• Most fridges with internal controls.
• Similar 3-door French door models.

Editor’s pick: 9 Things To Do When Your Smart Fridge Isn’t Cooling (DIY)

How the Samsung filter indicator works

The filter light is only available to Samsung fridges with ice and water dispensers. Its function is to alert the user when to change the water filter.

It flashes 3 different lights, which have different meanings. See below for the guide.

GREEN/BLUE:

• Meaning: Water is good for use.
• Action needed: N/A

Note: In the latest Samsung fridge models, the filter light indicator remains OFF (no light) instead of green or blue.

ORANGE:

• Meaning: Filter has been used for 5 months already/has reached 450 gal (2046 L).
• Action needed: Replace the water filter as soon as possible.

RED: 

• Meaning: Filter has been used for 5 months or longer/has reached 500 gal (2273 L).
• Action needed: Replace the water filter immediately.

“Is the filter light indicator really that important?”

If you’re sensitive about your health and want clean and safe drinking water…

Yes, it’s essential.

Why?

Well, you can only tell if the water isn’t safe for drinking if:

• It tastes different.
• There are tiny particles on it.
• Its color has slightly changed.

And this happens when the water is already highly-contaminated.

I mean, you wouldn’t want that to happen, don’t you?

So, to ensure clean and safe drinking water pay attention to your fridge’s filter light indicator.

Once it turns orange, make sure to get a water filter replacement as soon as you can.

You may also wonder: What is a smart inverter on a fridge?

5 tips to maintain your Samsung refrigerator

#1: Change the water filter every 3 to 6 months

Do you want fresh and filtered water at all times?

Then, make sure to change the water filter every 3 to 6 months. Or once the filter light indicator turns orange or red.

Here’s how to do it:

1. Turn OFF the water supply.
2. Open the fridge door.
3. Open the water filter cover.
4. Rotate the water filter counterclockwise to unlock it.
5. Pull out the water filter.
6. Insert the replacement.
7. Rotate it clockwise to secure.
8. Close the water filter cover.
9. Close the fridge door.
10. Turn ON the water supply.

Note: The steps may vary slightly depending on your fridge model and water filter type.

#2: Clean the water dispenser

A white film may form in your fridge’s water dispenser over time.

That white film is minerals from the water, which can collect dirt and dust.

So, to prevent that from happening, make sure to clean the water dispenser regularly.

To do that:

1. Push down and remove the water dispensers.
2. Clean it using water and mild soap.
3. Air dry the dispenser.
4. Return it from the fridge.

Note: You can also use vinegar or baking soda as replacements for the mild soap. These two ingredients are excellent in removing residues and unpleasant odors.

#3: Defrost the freezer once in 1 to 2 weeks

You may think that ice build-ups in the freezer aren’t much of a problem.

But it can actually cause water leakage over time and mess up with the fridge’s temperature sensor. 

To prevent that, defrost the freezer once in 1 to 2 weeks.

Here’s how to do it:

1. Unplug the refrigerator.
2. Open the freezer door.
3. Turn the temperature dial to “Defrost.”
4. Let the ice build-ups melt.

Pro tip: Place a fan in front of the freezer to speed up the defrosting process.

#4: Vacuum the condenser coils

Another way to maintain your refrigerator is to clean the condense coils. Which are responsible for keeping your fridge cool. 

Since the condenser coils are in the back of the fridge, they can accumulate dirt, dust, and debris over time. 

These things can affect the condenser’s performance. And cause your fridge not to cool efficiently.

That being said, vacuum the condenser coils at least twice a year to ensure optimal performance.

Cleaning these will require you to access the fridge’s back panel. So, do it when there are little to no food supplies in your appliance to avoid spoilage.

#5: Replace the door seal if necessary

Also, make sure to inspect your fridge’s door seal. And replace it if necessary.

Doing this is important to avoid warm air from entering the unit, which causes moisture.

You should replace the door seal if:

• There are gaps in it.
• Its edges are bent or worn out.
• The fridge isn’t closing properly.

Continue reading: 15 Refrigerator Do’s And Don’ts (Avoid #7 At All Times)