New iphone wont update during setup

Question:

i just got this phone, to transfer all my stuff over from my iPhone 7 Plus, but it’s making me do a mandatory software update first. It’s been stuck on “downloading…” for nearly three hours now.  I believe it’s attempting to download all my data from iCloud at the same time. What should I do?

[Re-Titled by Moderator]

iPhone 13 Pro

Posted on Nov 20, 2021 8:38 PM

Answer:

Answer:

No. Your iPhone is downloading your data from iCloud AND downloading / installing an iOS update. Your iPhone will need to download and update the iOS version first before the transfer data portion happens.

Make sure that your iPhone is setup to meet the following requirements before you attempt to update the iOS version-

• Your iPhone must have a fast Wi-Fi connection; you cannot update over cellular data or a cellular hotspot
• The iPhone can not be in Low Power mode
• The battery state of charge must be above 50%
• Your iPhone must have at least 6GB or more free storage space
• Your iPhone cannot be connected through VPN
• You should leave the phone plugged in until it finishes updating, both to assure that it remains above 50% and to keep Wi-Fi enabled (Wi-Fi turns off when the phone sleeps if not connected to power).

Axel F.

Posted on Nov 20, 2021 9:28 PM

User profile for user: ErikRatKing

Question: New iPhone 13 stuck on software update

To update your iPhone or iPad, you need a compatible device, an internet connection and enough storage. It also helps to keep your device connected to a power source.

If you can't install iOS 16 or iPadOS 16.1 on your iPhone or iPad

If your device doesn't support new software

If there's not enough space to update

If there isn't enough space to download and install an update, the software on your device will try to make space. It will remove only app data that it can download again and doesn't remove or relocate any of your data. If your device still doesn't have enough space, you can use your computer to update your device.

If you can't connect your device to your computer, you can make room for the update by removing the content and apps on your device that you don't use. Go to Settings > General > [Device name] Storage.

Find out more about the space that your apps and content use.

If the download is taking a long time

You'll need an internet connection to update your device. The length of time it takes to download the update will vary according to the size of the update and your internet speed. You can use your device normally while downloading the update, and your device will notify you when you can install it. To improve the speed of the download, avoid downloading other content and use a Wi-Fi network.

If you can't reach the update server or can't verify the update

If you try to update your device, you may see one of these messages:

"Unable to Check for Update. An error occurred while checking for a software update."
 

"Unable to Install Update. Software update requires a network connection."
 

If your device won't finish updating

If you're installing the update, the progress bar may appear to move slowly. The length of time an update takes will depend on the size of the update and the number of files on your device.

When you're updating over the air, keep your device connected to a power source. If your device runs out of power, connect it to a power source and turn on the device to let the update or restore complete.

Find out what to do if your iPhone or iPad appears frozen or won't start.

Remove and download the update again

Published Date: September 20, 2022

iPhone gets stuck when upgrading iOS 16? Why does this happen? Is there any methods to get this trouble done? Maybe many users has encountered this kind of iPhone issues, so this article comes here to help you out.

New iPhone stuck on install now seems to be a well-known issue. Even the Apple support team has taken note of it. The most typical scenario is when you set up your new iPhone 11/12/13/14 or transfer data & settings from the existing iPhone simultaneously.

When one's new iPhone 13/14 is stuck on install now, the delight of getting a new device becomes sour. A common fix for some users is returning the device to where they purchased it, but if you don't want to waste the time and money, this article shows 4 effective methods for addressing iPhone stuck on install now.

• Part 1. How Long Does It Take for the New iPhone Update to Install?

• 1.1 Is It Worth Upgrading the Latest iOS 16 Version?

• 1.2 How to Upgrade iOS 16 Version?

• Part 2. Why Is My iPhone Stuck on Install Now?

• Part 3. What To Do If Your New iPhone Is Stuck on Install Now?

• 3.1 Set up Your iPhone Again

• 3.2 Force Restart iPhone

• 3.3 Restore iPhone with iTunes (Data Loss)

• 3.4 Fix iPhone Stuck on Install Now with The Greatest iPhone Repair Tool (No Data Loss)

WooTechy iPhixer -- Video Guide to About iOS 16 Features

Part 1. How Long Does It Take for the New iPhone Update to Install?

It takes iOS about 20 to 40 minutes to install an iOS. Approximately a file of 5GB is needed to be downloaded and installed, which might take a moment. However, the specific time for your device is dependent on the speed of your internet connection and the available storage.

1.1 Is It Worth Upgrading the Latest iOS 16 Version?

Of course, it's pretty beneficial to upgrade iOS 16 version. Since the lateset iOS 16 brings mant new practical features for iPhone device, such as reimagined lock screen, edit and unsend messages, live text to video and so on, which can greatly improven the use experience for iPhone users.

1.2 How to Upgrade iOS 16 Version?

Go to your iPhone's Settings > General > Software Update.

Click Upgrade to iOS 16 button shown up on the screen.

Then select Download and Install, or you'll be directed to update your iPhone to iOS automatically. Enter your passcode if prompted

Part 2. Why Is My iPhone Stuck on Install Now?

There will be several reasons if your iPhone stuck on install now suddenly. In order to make you understand this error better, the following lists all the possible reasons in detail.

One of the most common reasons for the new iPhone stuck on install now is the internet connection. If the connection is bad or slow, the installation process will be stuck.

Besides, your device may be running out of storage because you have restored some data from your recovery. In such a case, the new iPhone 13 software update could get stuck on install now.

Apart from these two reasons, a low battery percentage is another viable cause of an iPhone stuck on install now. Your device may be preventing the installation process from continuing because your battery is low, significantly below 50%.

Part 3. What To Do If Your New iPhone Is Stuck on Install Now?

Below are the 4 effective solutions that will help you solve the new iPhone stuck on install now, from which, the last method -- using WooTechy iPhixer must help you solve your iPhone stuck issues with 100% certainty.

3.1 Set up Your iPhone Again

If your new iPhone is stuck on install now, then you may need to set it up as a new device. Just proceed to set up your iPhone as a new one without syncing your old iPhone data. After that, go to Settings and reset your iPhone to the factory settings.

When it is over, set up your iPhone again to see if the problem is resolved. Remember to sync the content in your old device this time.

3.2 Force Restart iPhone

Restarting any device can prove definitive in fixing any software bug of that device. You can apply the same notion for the new iPhone stuck on install now issue.

For iPhone 8 and above: Press and release the Volume Up button swiftly. Press and release the Volume Down button swiftly. Use a finger to press and hold the Side button on your iPhone until the Apple logo appears.

For iPhone 7/7 Plus: Begin by holding the Side button. With your finger still on the Side button, press on the Volume Down button. Wait till the screen goes off and the Apple logo appears.

For iPhone 6 and before: Hold the Home and Power button concurrently until the screen goes off and the Apple logo appears on the screen.

3.3 Restore iPhone with iTunes (Data Loss)

Restoring your iPhone with iTunes erases all the data and settings on your device. However, if you have it backed up, you can access the data later. By erasing your data and settings, any software glitch causing a new iPhone stuck on install now will be removed.

Connect your iPhone to a computer using a cable. Open the iTunes app on the computer.

At the top left corner of the iTunes app, you will find the Device icon. Tap this button.

Next, click on the Summary tab.

Then click Restore iPhone to begin restoring your device. Finally, the iTunes app will direct you on the remaining instructions to follow.

3.4 Fix New iPhone Stuck on Install Now with WooTechy iPhixer (No Data Loss)

The best alternative to efficiently fixing your new iPhone stuck on install now is WooTechy iPhixer. This tool can help remove the glitches that lead to the problem and further repair your device's system without data loss.

And no matter your iPhone/iPad/iPod is stuck on the spinning circle, update screen, Apple logo, recovery mode, etc. iPhixer is reliable to repair the device. It has a high success rate of fixing devices. What's more, it supports all iOS versions including the latest iOS 16.

Aside from fixing iPhone software issues, you can also use this tool to address all kinds of iPad problems, such as iPad boot loop, iPad black screen.

Other Prominent Features of WooTechy iPhixer You Shouldn't Miss

75.000.000+

Downloads

• Fix all iOS update issues like iPhone software update stuck on install now, iPhone flashing Apple logo, unable to verify update iOS, iPhone stuck on preparing update and more with several clicks.

• Apart from fixing the issue, iPhixer can quickly update your iPhone with the proper software installed without the stuck issues.

• With a user-friendly interface and easy-to-use steps, iPhixer is a 100% safe and professional program, no privacy invaded.

• Unlike using iTunes, it restores your iPhone back to normal without causing any other errors.

• Besides, you are also allowed to freely enter/exit recovery mode for without any data loss.

Follow These Steps to Fix Your New iPhone Stuck on Install Now:

Step 1 Firstly, download and install the iPhixer application. Launch the application on your Windows or Mac computers, then connect your device to your computer. Select the Standard Mode from the repair mode options available on your screen.

Step 2 Tap on the Next button on your screen. The model of your phone will be displayed on the screen.

Step 3 It will start downloading the software that matches your iPhone model and system version after clicking the Download button.

Step 4 Upon the completion of the download, click the Start button to fix your iPhone. After that, your iPhone will restart automatically and work normally with the iOS version you like.

Note

Now you ca try updating your iPhone device once more, you should can succeed updating your device to the latest iOS system.

That's due to this wondeful iPhone repair tool - WooTechy iPhixer. If you want to keep your iPhone device for a long time, then you definitely can hold this amazing tool, in case you will need it one day.

Conclusion

To prevent the new iPhone stuck on install now, ensure your internet connection is fast, get enough storage, and keep your device charged above 50%.

And suppose other software malfunctions are responsible for your new iPhone being stuck on install now or under any other conditions, the solutions mentioned above like the use of WooTechy iPhixer will help unstuck your iPhone from install now with no data loss.

Just click the Download Now button below, you can have this wonderful iPhone repair tool for yourself.

Why is my brand new iPhone not updating?

Why is my iPhone setup stuck on software update?

Why wont my new phone install the update?