What footprint does Delta Point Pro use?

Below, you will find specific red dots paired with the correct base. All of the MaddMacs bases are red dot specific, but many red dots use the same footprint, hole spacing and pin alignment.
Some have the same footprint but use less alignment pins. For example, the HoloSun® 407K/507K has the exact footprint of the Shield® RMS but only requires the two front pins. While some have the same hole spacing and pin alignment but have different footprints. For example, the DP Pro and Shield® RMS have the exact hole spacing and pin alignment but the DP Pro is much longer than the Shield® RMS.

Índice Show

Does the Delta Point Pro have an RMR footprint?
What guns does deltapoint Pro fit?
What red dots have the same footprint as RMR?
Do the RMR and SRO have the same footprint?

Burris® FastFire™ II & III
Vortex® Venom™

Trijicon® RMR & SRO
HoloSun® HS407C, HS 507C & HS508T
Swampfox Kingslayer

Leupold® DeltaPoint Pro

Shield® RMS, RMSc, RMSw & SMS
HoloSun® HS407K & HS507K ***Choose 407K in the drop down menu. The standard RMS base will NOT work with the 407K/507K***
Sig® Romeo0 ***Choose RMS-Compact in the drop down menu after clicking Buy Now***
Riton X3 Tactix MPRD *** Choose RMS-Compact in the drop down menu after clicking Buy Now***

All of the Romeo red dots use different footprints or pin spacing. There are 3 options to choose after clicking Buy Now.
1. Sig® Romeo1
2. Sig® Romeo1 Pro
3. Sig® Romeo3 XL

All other bases not listed here are red dot specific. For example, if you have a Vortex® Viper, you will want to go to Vortex Venom/Viper/Razor™ page and look for the base designed for the Viper. Yes, the Viper will fit the base designed for the Venom, but the footprint is totally different so it will not be flush on all four sides of the base.

If you don't see your red dot listed here or can't find a base on this website specifically designed for the red dot you have, you may be able to use a MaddMacs base that has the same hole spacing and pin alignment. Click on this link to find your red dot - Footprints/Mounting Standards on Red Dot Sights

Expert Answer

Answered by Armando R., Gear Expert, from IL, United States, on January 28, 2020

Technically yes, the Delta Point Pro matches the J.Point mounting footprint. But this specifically uses Shield RMS/RMSc footprint mounts because of the dimensional difference between the Leupold Delta Point Pro and the Romeo Zero as they are very different in size. The Delta Point Pro is much larger than the Romeo Zero. You will need the Romeo1 PRO as that matches the Leupold Delta Point PRO footprint. It can be found here:

https://www.opticsplanet.com/sig-sauer-romeo1pro-1x30mm-red-dot-sight.html

1 of 5 found the following answer helpful.

Was it helpful to you? Yes | No

Leupold DeltaPoint Pro

More Views

Videos

Do you need help with this item?

Our experienced team is here to resolve any issues before, during or after you purchase this item. If you have a question don't hesitate to contact us bellow:
Contact us

i have a 320X compact on the way that held a delta point pro 2.5 moa. i was looking for something in the 6moa range with the same footprint. i know DDP has a 7.5 triangle. if i read correctly, the DPP has an RMSc print. but the smaller micro sights for this might be to small. i emailed holosun about this as well. but i think they're all RMR's

level 1

No, the Romeo Zero does NOT share the same footprint as the DeltaPoint pro.

The Romeo 1 Pro has the same footprint as the DeltaPoint Pro.

level 2

Now the new Romeo Zero Pro shares the 1 pro footprint. Old post but in case anyone pops in like I did

level 2

What kind of optic cuts will it fit then?

level 1

It's not going to fit on a full-size cut for optics. It's a sub-compact red dot meant for the p365xl. I think(?) it fits the springfield hellcat but might need an adapter plate.

level 1

It’s not the same footprint but it shares mount hole spacing and diameter. Also has the holes for the 4 DPP recoil bosses.

level 2

So it will technically fit but there will be space left on the sides?

level 1

Correct. Not so much side to side but mostly front to back.

level 2

Awesome I'm ok with that. Thanks for the help!

Does the Delta Point Pro have an RMR footprint?

This adapters fits slides cut for the Deltapoint Pro footprint. They allow attachment of RMR footprint optics.

What guns does deltapoint Pro fit?

The Deltapoint Pro currently fits the following pistols: Beretta 92F * 1911 * Glock * Glock MOS * Sig 226 * Springfield CZ 75 * HK P2000 * Kimber Fixed/Adjustable * S&W M&P S&W Classic * Walther Q5 Match pistol with included mount* *** S&W CORE & FN-X Tactical adapter plates coming soon.

What red dots have the same footprint as RMR?

Red dot sights that share this mounting standard: Trijicon RMR Footprint. Trijicon SRO Footprint. Holosun 407C Footprint. Holosun 407C V2.

Do the RMR and SRO have the same footprint?

And because of that, the SRO has the same footprint as the RMR… This was a really smart choice because, just like with the RMR, it makes the SRO really easy to mount on your pistol, carbine, or shotgun… That being said, the only thing you should be aware of is that the SRO is a slightly bigger optic than the RMR…