Why is my logic pro vape flashing?

Are you 18 years old or older?

FAQ SEARCH

FAQ Search

Logic Compact batteries will last for around 300 charge cycles (approximately 12 months) before they will need to be replaced, although this will depend on how the battery has been used and how you have recharged it.

Logic Compact batteries will last for around 300 charge cycles (approximately 12 months) before they will need to be replaced, although this will depend on how the battery has been used and how you have recharged it.

The LED light shows the status of the device as follows:

Vaping: LED illuminated white

Low battery: LED flashes 10 times

Charging: LED gradually lights on and off

100% charged: LED illuminated white whilst connected to the charger

Turned off: No LED light

Modern and pocket-sized, Logic Compact is a closed tank device that’s perfect for on-the-go vaping. Just click in one of the magnetic pods and you’re ready to vape.

Once you have purchased your Logic Compact and your Logic Compact e-liquid pods (sold separately) follow these steps to get started:

1. Remove the Logic Compact e-liquid pod (sold separately) from its protective packaging.

2. Click the pod into the top of the device until it clicks with the magnetic lock.

3. Activate the device with one puff.

To charge, insert the bottom of the device into the USB charger until it clicks with the magnetic lock.

The LED light will gradually turn on and off while it’s charging, and will stay lit when it’s charged.

Logic Compact batteries have been specially designed to last for approximately one day between charges. Of course, this may vary depending on how much you vape and how you recharge the battery.

The Logic Compact Electronic Cigarette may become slightly warm during charging and during normal usage (due to the heating process). DO NOT use the Logic Compact if it becomes unusually hot to the touch and please contact the Logic Contact Centre on 1800 200 633.

Logic Compact devices should not be used while they are charging.

Logic Compact pods contain e-liquid and are specially made for use with Logic Compact devices.

1. Remove the used Logic Compact e-liquid pod.

2. Click the pod into the top of the device until it clicks with the magnetic lock.

3. Activate the device with one puff.

DO NOT use the Logic Compact e-liquid pods if the anti-tamper seal on the box appears to have been broken.

It is not possible to use Logic Compact pods with other brands of e-cigarette. Logic Compact pods are designed exclusively for use with the Logic Compact device.

DO NOT refill Logic Compact pods.

Clean the metallic parts of the battery and pod with a soft dry cloth before vaping. Always keep your Logic Compact device dry.

CATEGORIES

• Quality Standards & Safety
• Menthol Ban
• Logic Compact
• Logic LQD
• About Vaping
• About Logic Vapes
• Using your vape

Create an account to follow your favorite communities and start taking part in conversations.

Log in to confirm you're over 18

r/Vaping

This page may contain sensitive or adult content that's not for everyone. To view it, confirm your age.

Use of this site constitutes acceptance of our User Agreement and Privacy Policy. ©2022 reddit inc. All rights reserved. REDDIT and the ALIEN Logo are registered trademarks of reddit inc.

Download the app to use

Anonymous Browsing

If your fully charged battery or device flashes when pressed, there may be a 'short' occurring or the protection measure to prevent the battery from shorting is being activated. This can be caused by a variety of things, but the most common issue is liquid on the connection thread or battery posts (depending on what type of vape you have).

If this is occurring the first thing to do is wipe the threads of the battery and tank, reassemble, and then try again. If that doesn't work, try loosening the tank a bit and see if it fires, as it may be on too tight. You need only loosen it ever so slightly at first, then keep gradually loosening it until the light stays solid.

Issues with pod mod devices like JUUL, Phix, and Suorin can be attended to in a similar fashion: simply clean both the pod and device connections with a cotton swab or tissue. For product specific issues, refer below:

My Juul Won't Hit

If you find your Juul won't hit, then you can try two things. First, take a cotton swab and clean around the battery posts located inside the Juul device (a bit of pressure and a swirling motion works particularly well). You can also clean the bottom of your pod to make sure it's free of juice.

Another cause of your Juul not firing could be due to the connection not being properly secured. Pop out your Juul pod and check to see if the two metal tabs stick out enough to make solid contact with the battery. Should they be pushed in too far, you can take your fingernail or a knife and slightly angle them upward (cautiously).

My Juul Won't Charge

If your Juul won't charge, then you may need to clean the base of the Juul device with an alcohol swab to remove gunk that accumulates from normal usage. If the problem persists, you may need to buy a new Juul USB charger or replace the device itself. 

Juul Blinking Green

A Juul blinking green will occur under normal circumstances after you use your Juul or activate the battery check by tapping the device twice (in some instances by accident). It indicates a full or near-full battery. If this is not the case and your Juul is flashing green in quick succession, refer to the "My Juul Won't Hit" section above, or contact the Electric Tobacconist helpdesk.

Juul Blinking Yellow

A Juul blinking yellow will occur under normal circumstances after you use your Juul or activating the battery check by tapping the device twice (in some instances by accident). It indicates a medium battery. If this is not the case and your Juul is flashing green in quick succession, refer to the "My Juul Won't Hit" section above, or contact the Electric Tobacconist help desk.

Juul Light Stays On

The Juul LED will typically stay on for around 8–10 seconds after using the device and is perfectly normal. Try shaking your Juul back and forth to enter "Party Mode"!

Why Is My Suorin Air/Sourin Air Pro Blinking Blue?

The Suorin Air blinking blue is a common issue that is most likely caused by either a faulty pod or vape juice interrupting the connection between pod and battery. Try cleaning the bottom of the pod with a paper towel or cotton swab as well as the connection point on the battery. You may also want to try an entirely new pod. 

If these methods do not work, there is a chance that vape juice has leaked into the battery housing unit. This is possibly caused by using a high-PG nicotine salt or traditional vape juice. High-PG liquids are less viscous than VG juice and are more prone to leaking out of a Suorin Air pod into the inner battery housing. In this case, you may need to replace the unit completely: if you bought your Suorin Air at Electric Tobacconist, it may still be under warranty and you can contact the help desk for a replacement. You may want to pick up some better juice as well!

Why is my vape flashing and not working?

Why does my vape battery keep flashing?

Why does my vape keep flashing 3 times?

How do I know if my logic vape is charging?