What is the surface area of a rectangular prism with the dimensions l= 15 cm ,w= 8cm, h = 9cm?

Finding the surface area of all rectangular prisms allows you to also find the surface area of any cube, since a cube is a type of rectangular prism.

Surface Area Of A Rectangular Prism

What Is A Rectangular Prism?

A rectangular prism is a six-faced, three-dimensional solid in which all the faces are rectangles. All six faces meet at right angles to one another. Opposite faces are congruent.

A special type of rectangular prism is a cube, in which all six faces are congruent.

What Is The Surface Area Of A Rectangular Prism?

The surface area of a rectangular prism is the total area of all six faces. When you have a cube, finding the area of one face allows you to find the total surface area of the solid very quickly, since it will be six times the area of one face.

Surface Area Of A Rectangular Prism Formula

Finding surface area for all rectangular prisms (including cubes) involves both addition and multiplication. You must know the width, length and height of the prism before you can apply this formula:

A = 2(width × length) + 2(length × height) + 2(height × width)

We can use common abbreviations for width (w), length (l) and height (h) and recast the formula:

A = 2wl + 2lh + 2hw

We can simplify that by factoring out the 2:

Since every face of a rectangular prism has a congruent, opposite face, you are tracking down all six faces in pairs. Using the formula helps prevent confusion or keeping track of which faces you have measured. You only need the three dimensions.

Surface Area Of A Rectangular Box Formula

For a cube or rectangular box, the formula becomes even easier. Take the length of any edge, a:

This works because every dimension of a cube -- width, height, and length -- is the same. Any two measurements will give the area of one face, and the cube has six faces, so the area is 6a2. If you have trouble remembering that special formula, you can always use the general one for rectangular prisms.

How To Find The Surface Area Of A Rectangular Prism

You have been asked to wrap a gift box your mathematics club will give to your math club adviser. The box contains 100 books of math jokes, so it is a good-sized rectangular prism. (Do you know how many books are in the box? 😊)

[insert cartoon of box with labeled dimensions as shown]

Its dimensions are:

• Width -- 30 cm
• Length -- 15 cm
• Height -- 20 cm

Use the area formula to find out the minimum amount of gift wrap you will need. Work first; then peek.

Let's build our equation for surface area of a rectangular prism starting with our formula:

A = 2 wl + lh + hw

A = 2 30 · 15 + 15 · 20 + 20 · 30

A = 2 450 + 300 + 600

A = 2 1,350

A = 2,700 cm2

Though that sounds like a lot of gift wrap, it is only 0.27 m2. You have a sheet of gift wrap that is 0.75 m × 0.5 m. Do you think you will have enough?

Sure, even if you leave a little extra for overlap, since you have 0.375 m2 and only need 0.27 m2! (Did you know only 10 books were in the box? 😲)

Surface Area of a Rectangular Box

Now lets look at how to find the surface area of a right rectangular prism, box, or cube.

You also have to wrap the math club's vaunted Cube Root Cube for summer storage. The cube has 12 congruent edges, each 45 cm. Work first; then peek.

[insert cartoon of fancy box labeled Cube Root Cube]

Let's build our equation for surface area of a rectangular box starting with our cube formula:

A = 6a2

A = 6452

A = 62,025

A = 12,150 cm2

As is your club's tradition, you will use the Permanent Records of the Club Elders to wrap the prized Cube Root Cube. You have 2 m2 of their records dating back to 1960. Though 12,150 cm2 sounds like a lot, it is only 1.215 m2, so you have plenty of storage wrap to protect the Cube and its priceless contents of cube roots.

How To Calculate Surface Area Examples

Practice using these surface area word problems for rectangular prisms and cubes. Before looking at the answers, try your hand at both! See if you get the right answers.

You need to cover the travel cage for your pet boa constrictor so you can carry it on the school bus. What is the surface area of the cage?

[insert drawing of rectangular prism labeled 1.5 yards long, 0.25 yards wide, 0.25 yards high; maybe draw a smiling cartoon snake inside the prism]

A = 2 wl + lh + hw

A = 2 0.25 × 1.5 + 1.5 × 0.25 + 0.25 × 0.25

A = 2 0.375 + 0.375 + 0.0625

A = 2 8.125

A = 1.625 yds2

Let's try another word problem to find the surface area of a rectangular box.

Your mathematics teacher is shipping a box full of imaginary numbers to a colleague across the country and has asked you to wrap it in brown kraft paper. How much paper do you need?

[insert drawing of labeled box 12" x 12" x 12"; maybe draw some stamps on it as if it were being mailed]

A = 6a2

A = 6122

A = 6144

A = 864 in2

You need 864 in2 of paper, which is only six square feet!

Next Lesson:

Instructor: Malcolm M.
Malcolm has a Master's Degree in education and holds four teaching certificates. He has been a public school teacher for 27 years, including 15 years as a mathematics teacher.

In order to continue enjoying our site, we ask that you confirm your identity as a human. Thank you very much for your cooperation.

Let's say that you're trying to tile a swimming pool and want to know the area you have to tile. If the pool is rectangular with a flat bottom, then what we're dealing with is precisely a rectangular prism! Let's look at a pretty picture to see it clearly.

Okay, we know it's hard to keep your eyes away from the floaty unicorn, but let's get back to the problem at hand!

Say that the pool has a length of 8 feet, a width of 6 feet, and is 5-foot-deep. Now that we have the numbers let's try to put them in terms of the notation we've used above.

Firstly, the sides of the base of our pool are its length and width, which in our case are 8 ft and 6 ft, respectively. Since we're using l and w as the base edges, we can use these numbers in the calculator above and set l = 8 ft and w = 6 ft. Note that it doesn't matter in which order we put them; it only translates to looking at the pool from another angle and doesn't change its surface area.

We're left with the depth of our pool and the number c in the calculator. And that is exactly what we should do now: set c = 5 ft, which is the depth of the pool or the height of the prism.

"And we're done, aren't we?" Well, not exactly. The surface area of a rectangular prism calculator gives us the answer:

A = 2 × l × w + 2 × l × h + 2 × w × h = 2 × 8 ft × 6 ft + 2 × 8 ft × 5 ft + 2 × 6 ft × 5 ft = 236 ft².

But that is the surface area of the entire prism, and we don't want to tile it all around. After all, if we tile the top, it would be pretty difficult to get in (or out), wouldn't it? That would be some top-level malice, even worse than the removal of the ladder for your Sims.

To find the correct answer, let us move to the advanced mode. It allows us to see the base area and the lateral area of the solid. Since we know how to find the surface area of a rectangular prism, i.e., we know that

A = 2 × A_b + A_l,

we only need to subtract the extra area that we're not tiling from that. And that is the top. But the top base is the same as the bottom one, so the area we need to tile is, in fact:

tiling_area = A - A_b,

which, in our case, is:

tiling_area = 236 ft² - 48 ft² = 188 ft².

Now, that puts us one step closer to finishing the pool and being able to admire your work while drinking a cold one. That said, the prism isn't the only 3D shape with a rectangular base; find out more on the calculator for the surface area of a rectangular pyramid.