Do you have to signal when parking

Signalling or indicating when driving is a simple safety and courtesy task that many of us forget to do once we have obtained that all important full drivers licence and have a little experience behind us.

Whether individuals simply forget to signal or they think it’s no longer important is an issue that can and frequently causes accidents. It’s for this reason that driving examiners are rather strict in regards to either the overuse or lack of signalling during a driving test. This section explains when to signal when driving and when not to signal. Useful for learner driver and experienced drivers.

Listed are frequently asked questions by learner drivers and experienced drivers wishing to take the driving test. The following examples are what the driving examiner expects of a candidate during the practical driving test.

Should you indicate when pulling away

Basically if anyone, even a pedestrian will benefit from seeing your signal, then the answer is yes. If there is no one around, then a signal is not necessary, although if you still decide to signal and no one will benefit, it has no consequences on the outcome of your driving test.

However, use caution. If you are ready to move off and you notice a vehicle approaching from the rear to pass you, do not indicate off if you intend on waiting for them to pass. The effect of this can cause the approaching vehicle to slow down or stop to let you pull away or to swerve around you. Such consequences will likely fail the driving test. Wait till the vehicle has passed and if all clear, signal if necessary. For the correct procedure on moving and signalling, see:

• Moving off

Should you indicate when parking up

Indicating when parking up essentially follow the same rules as when pulling away. If anyone will benefit, you must signal your intentions to park up. If no one will benefit, it is not necessary to indicate although you may still do if you wish.

Should you indicate when overtaking a cyclist

Deciding whether to indicate when overtaking a cyclist depends entirely on the situation. If for example you are driving and notice a cyclist ahead and there is oncoming traffic, it then depends on the width of the road. If the road is wide enough to overtake the cyclist safely, but may result in your car being positioned a little towards the centre of the road, a signal will benefit the oncoming traffic as it will show them your intentions of overtaking the cyclist.

Similarly, you may have oncoming vehicles but the road isn’t wide enough to overtake a cyclists. In this situation, you likely need to reduce speed drastically. A right signal may be of benefit to any vehicles following you, especially if they may not have noticed the cyclists.

Avoid indicating on each occasion that you’re overtaking a cyclist. This is more likely to cause confusion with drivers thinking you are making a turn at a junction or driveway. You must assess each situation and indicate only if you think the benefits of doing so will increase the safety of yourself and others. For further information on dealing with cyclists during driving lessons and the driving test, see:

• Cyclists and cycle lanes

Do you indicate around parked cars

Generally it is not necessary to indicate around parked cars. There can however be the occasional exception and again this is down to the particular situation.

If for example you are traveling along a narrow road, a vehicle is behind you, up ahead are parked cars on your side of the road but you need to wait behind the parked vehicles to allow an oncoming vehicle to pass. In this situation due to the road being very narrow, the vehicle behind may not see the parked cars and when you stop, they may interpret this as you parking up. Indicating to the right in this situation would be safer as it will provide the vehicle behind with a clear indication of your intentions.

Similarly to overtaking a cyclist, indicating around parked cars for the majority of the time is not required. Each situation must be assessed on a individual level and only signal if absolutely necessary.

• The passing parked cars tutorial provides further information.

Should you indicate when overtaking

Yes you must always indicate when overtaking another moving vehicle whether on a single carriageway or dual carriageway. It is not mandatory however to signal to the left once you have passed the vehicle to acknowledge your intention of moving back onto your side of the road – although you may do so regardless. For further information on the correct procedure for overtaking, see:

• Overtaking

Should you indicate at a roundabout

If intending to turn left or right on the approach to a roundabout, you must indicate in the direction you intend to take. If following the road straight at a roundabout, you should not indicate. If turning right or going straight, you must apply the left indicator just after the exit which is directly before the one you are taking. Upon leaving roundabouts, ensure all signals have terminated.

• See roundabouts for further help.

Should you indicate at a mini roundabout

Yes you must indicate on the approach to a mini roundabout just the same as a standard roundabout. The difference with a mini roundabout however is you do not need to provide the secondary exit signal as mini roundabouts are too small for this. See:

• Mini roundabouts

Should you signal during the turn in the road / 3 point turn

No there is no need to signal during the turn in the road. If there is a vehicle, cyclist or pedestrian that may be affected by you performing this manoeuvre, you will need to wait until it is clear. Therefor there will never be a need to indicate.

• See turn in the road for further information on this driving test manoeuvre.

Should you signal during the reverse around a corner

As you are attempting this manoeuvre, you will drive a short distance past the left turn you intend on reversing into. Just as parking up, you may need to signal to other road users your intention of stopping the car. Generally elsewhere during the manoeuvre, there isn’t usually a need to signal.

• Read the in-depth tutorial on reverse around a corner for further help.

Should you signal when parallel parking

During the driving test, the examiner will ask that you park up behind the vehicle that you will be parallel parking on. As this is essentially parking up on the left, you may need to signal to the left at this time as described above. Other than this, there shouldn’t be any other reason to indicate during this manoeuvre.

• Find out more about parallel parking / reverse parking.

Indicating when merging

Whilst building up speed down a dual carriageway or motorway slip road, you should indicate to the right approximately half way down the slip road and once you have merged with traffic on the carriageway, cancel your signal.

Indicating when changing lanes

Whether on a motorway, dual carriageway or in a one-way-system in a city or town, you must indicate your intention to change lane if other vehicles are present.

• See change lanes for further help.

Should you indicate to leave a motorway or dual carriageway

Dual carriageways and motorways display markers in the form of 3 dashes (300 yards), 3 dashes (200 yards) and 1 dash (100 yards) from the exit junction. You must indicate at the 300 yard marker.

• See dual carriageway tutorial for further information.

How far in advance should you signal before making a turn

When driving in residential areas you should signal around 30 meters (100 feet) in advance of making a right or left turn. This is assuming there are no other turns on the same side of the road before the turn you intend on taking, else you will need to signal after this turn. For high speed roads this distance increases. 70 mph dual carriageways for instance, signalling should start from around 275 meters (900 feet) from your exit.

Use of signals

A surprising amount of driving tests are failed due to the overuse, lack of or incorrect use of signals. Even what might appear a minor issue such as forgetting to cancel a signal after exiting a roundabout can easily fail a driving test.

Whilst learning to drive, there are times that a signal must be applied such as at junctions for example. Knowing when these times are along with the appropriate timings for applying signals is learnt reasonably easily with a driving instructor.

There are other situations for the correct use of signals that can take some time to master for learner drivers as it requires the ability to read the road ahead, assess any given situation and to decide if a signal is necessary, such as passing cyclists for example. This guide on when to signal when driving should help learner drivers and also experienced drivers intending on taking the UK driving test to understand the correct use of signals.

When must you indicate

Whilst driving and during a driving test it is compulsory to indicate at junctions, roundabouts, left and right turns and whilst overtaking another moving vehicle. Other conditions may apply, all of which are explained in this section.

Do You Have to Indicate if No One is Around?

Put simply, yes! The simple fact of the matter is that you never know for sure if no one is around. You could be taking a left or right turn for example and a pedestrian who you didn’t see is about to cross the road at that junction. They would probably assume you’re not turning since you didn’t indicate.

Tutorials related to indicators / signals

• Driving hand signals