How long does it take to charge Cat Power Station?

The instruction manual does not say. Someone mentioned 6 hours. But that is not a valid answer under all circumstances. According to the instruction manual, in a worst case situation, recharging can take 24 to 48 hours. I believe 6 hours would be OK if you were giving the power station its mandatory once-per-month rech… see more The instruction manual does not say. Someone mentioned 6 hours. But that is not a valid answer under all circumstances. According to the instruction manual, in a worst case situation, recharging can take 24 to 48 hours. I believe 6 hours would be OK if you were giving the power station its mandatory once-per-month recharge and it had not been used since the previous recharge. But if you had used your power station between required monthly recharges, then the length of time you would want to recharge it would depend on the amount of use you gave it since the last recharge. A very important thing to remember is that it is impossible to overcharge this power station. As for myself, once each month, on a weekend, I start the recharge Saturday morning and then unplug it Monday morning just before going to work. That way I know I am maintaining it at peak performance. By the way, all batteries self-discharge over time, even if they are not used. Another thing to remember is that lead-acid batteries like this one, and those in automobiles, last the longest if they are maintained at a high level of charge. Therefore, if you care to recharge your power station multiple times per month even if it had not been used, that actually is a good thing. see less The instruction manual does not say. Someone mentioned 6 hours. But that is not a valid answer under all circumstances. According to the instruction manual, in a worst case situation, recharging can take 24 to 48 hours. I believe 6 hours would be OK if you were giving the power station its mandatory once-per-month recharge and it had not been used since the previous recharge. But if you had used your power station between required monthly recharges, then the length of time you would want to recharge it would depend on the amount of use you gave it since the last recharge. A very important thing to remember is that it is impossible to overcharge this power station. As for myself, once each month, on a weekend, I start the recharge Saturday morning and then unplug it Monday morning just before going to work. That way I know I am maintaining it at peak performance. By the way, all batteries self-discharge over time, even if they are not used. Another thing to remember is that lead-acid batteries like this one, and those in automobiles, last the longest if they are maintained at a high level of charge. Therefore, if you care to recharge your power station multiple times per month even if it had not been used, that actually is a good thing.

Document

How long does it take to charge Cat Power Station?

CAT CJ1000DCP Jump Starter and Compressor

How long does it take to charge Cat Power Station?

CAT CJ1000DCP Jump Starter and Compressor

How long does it take to charge Cat Power Station?
THIS QUICK START GUIDE IS NOT A SUBSTITUTE FOR THE INSTRUCTION MANUAL. PLEASE REFER  TO THE INSTRUCTION MANUAL AND YOUR VEHICLE’S USER’S MANUAL BEFORE USE.

IMPORTANT CHARGING INSTRUCTIONS

  1. Immediately charge this unit for a full 40 hours upon receipt. This unit’s internal battery is shipped in a partially charged state and must be fully charged before use.
  2. Fully charge the unit immediately after purchase, every 30 days, and after each use. Lead-acid batteries can lose charge over time. Regular recharging can optimize performance and battery life.

How long does it take to charge Cat Power Station?

DIGITAL DISPLAY

How long does it take to charge Cat Power Station?

How long does it take to charge Cat Power Station?

ICON SOLID FLASHING
How long does it take to charge Cat Power Station?
Unit is fully charged Unit is charging
How long does it take to charge Cat Power Station?
USB power is ON
How long does it take to charge Cat Power Station?
How long does it take to charge Cat Power Station?
Compressor feature has been selected Compressor feature is ON
How long does it take to charge Cat Power Station?
Vehicle has started Ready to
Jump-start
How long does it take to charge Cat Power Station?
How long does it take to charge Cat Power Station?
System fault detected*
How long does it take to charge Cat Power Station?
Correct Clamp connection
How long does it take to charge Cat Power Station?
How long does it take to charge Cat Power Station?
Reverse Clamp connection
How long does it take to charge Cat Power Station?
  • Consult the TROUBLESHOOTING section of the Instruction Manual for further info.

REVERSE POLARITY ALARM

When battery clamps are connected in reverse polarity, an audible alarm (continuous beep) will sound and the LCD screen will display the Reverse Polarity Indicator icon (please see Instruction Manual for details). DO NOT activate the jump starter. If this happens carefully disconnect the clamps and re-connect with the proper polarity. Ensure that the grounded clamp has a firm and clean connection.

USING THE AIR COMPRESSOR

To prevent overheating, Air Compressor will automatically shut off after 10 minutes. Please allow a 30-minute cooldown before resuming inflation. Note that the Air Compressor will store the last PSI setting in memory, making it easier to regularly top off your vehicle’s tires.

USB POWER

  1. Press the USB button on the control panel.
  2. Plug the electronic device into any of the USB Ports and operate normally.
  3. LCD Screen will display Voltage Indicator and USB Power On icon.

©2020 Caterpillar. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” “Caterpillar Corporate Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. ONE YEAR LIMITED WARRANTY: This product is covered by a one (1) year limited warranty. See the instruction manual for full details. TO REDUCE THE RISK OF INJURY, THE USER MUST READ THE INSTRUCTION  MANUAL. The product in this box may differ slightly from that pictured. Not all objects are included. Baccus  Global, a licensee of Caterpillar Inc. US Patent No. D761,200. *Sure Fit® is a registered US trademark and Set & Forget™ is a  US trademark owned by Baccus Global LLC. This unit was designed for household use only.

FAQ’S

How do I charge the unit?

The unit can be charged by connecting an AC power source to the DC input port on the back of the unit.

How long will it take to charge?

It will take approximately 40 hours to fully charge a completely discharged unit.

How long will a full charge last?

A fully charged battery should provide enough power to start an average size vehicle up to 20 times. If you are using the compressor, it will reduce the number of jump-starts you can do before recharging.

How long does it take to recharge?

It takes approximately 10 hours to recharge a completely discharged unit.

What is reverse polarity alarm and what should I do if I hear it?

When battery clamps are connected in reverse polarity, an audible alarm (continuous beep) will sound and the LCD screen will display the Reverse Polarity Indicator icon (please see Instruction Manual for details). DO NOT activate the jump starter. If this happens carefully disconnect the clamps and reconnect them properly. If this happens again, please contact your authorized service center or call Customer Service at 1-800-732-6839 for assistance.

How do I charge my cat jump starter?

CHARGING/RECHARGING
Open the AC adapter cover located on the back of the unit and connect an extension cord to the unit. Plug the other end of the cord into a standard 120-volt AC wall outlet.
Charge until the green LED Battery Status Indicator lights solid.
Once fully charged, disconnect the extension cord.

Can a jump starter charge a battery?

A jump pack — a more conveniently designed portable jump-starting device — is the modern solution for how to charge a dead battery in your car. You can even use them on your own, without the need for another person or connecting to a running vehicle.

How many volts is a car battery?

12.6 volts
When we take a closer look, we see car battery voltage can range anywhere from 12.6 to 14.4. With the engine off, the fully charged car battery voltage will measure 12.6 volts. This is known as “resting voltage.” When the engine is running, battery voltage will typically rise to 13.5 to 14.5 volts.

Where is the reset button on a generator?

Reset Breaker for Power Tech Generators. Reset breakers are located on the control box of your generator along with the main on/off switch and main breakers. Reset breakers protect the circuit from surges. When your generator experiences a surge, these breakers need to be pushed in to be reset.

How long does cat jump starter battery last?

Typically as a general rule 24 – 48 hours immediately after purchase and after every use. It is also recommended to recharge every 30 – 60 days for approximately 12 hours or until the battery status indicators show full when the product is not in use.

How do you know when a jump starter is fully charged?

Usually an indicator light on the jump starter tells you when a recharge is necessary. Simply insert the power adapter into an outlet and charge the battery until the light indicates a complete charge.

What does 1000 peak amps mean?

Generally speaking, a jump starter with a higher peak amp rating is more powerful than one with a lower peak amp rating. Peak amps typically ranger from 300 to 1000 amps with some very powerful ones exceptionally reaching over 3000 amp.

How long does it take to charge Cat Power Station?

Documents / Resources

Post navigation

How long does it take to charge a booster box?

When you arrive back home, it's important to recharge the jump starter as soon as you can. Most portable jump starters will plug directly into an AC outlet. Recharge the unit for at least 3 hours. Some units will require 12-24 hours for a complete charge.

How do you power off a Cat Power Station?

You can press the LED and USB buttons to turn them on and off. but while either of them are on the device won't turn off by itself. Press the USB and LED buttons until their lights are not switched on, wait for a while, and it should switch off automatically.