How much baking soda does it take to increase alkalinity?

The pH scale runs from 0 to 14, with 0 representing acidic solutions like battery acid and 14 representing alkaline solutions like liquid drain cleaner. Baking soda rests around 8.4 on the pH scale, slightly above the neutral mark of 7. The effect of baking soda will be influenced by the current pH of your water--you will not be able to raise the pH above 8.4, but you can raise the pH to a more neutral level if it is below 8.4.

Measure the pH of your existing water. Insert the strip into the water and let it rest for 10 to 30 seconds. The amount of time you need to hold the strip in the water will depend on the brand of the strip; follow the manufacturer’s instructions if in doubt. Use the chart that came with your pH strips to compare color and determine the pH.

Add baking soda to your pool. If the pH is under 7.2, you will need to add 3 lbs. of baking soda per 10,000 gallons in the pool. If the pH is between 7.5 and 7.2, add 2 lbs. per 10,000 gallons. If the pH is above 7.5 then don’t add any.

Raise the pH of your hot tub if the pH falls below 7.2. Add 1/3 cup per 500 gallons per decimal point you need to raise the pH. For example, if you have a hot tub that holds 1,000 gallons of water and has a pH of 7.0, you would need 1-1/3 c. baking soda.

Make your drinking water slightly alkaline. Add 1/4 tsp. of baking soda to 1 gallon of water. Drinking slightly alkaline water is purported to help dieters lose weight.

Related Articles

How to Use pH Strips to Test Water

How to Measure the Acidity of Soft Drinks

How do I Calculate the Amount of Acid to Reduce Water...

What Do the Colors Indicate on a pH Test Strip Paper?

How to Raise the Alkalinity in a Freshwater Aquarium

How to Calculate the pH of Lemon Juice

Does Salt Change the pH of Water?

What Is pH of Sodium Carbonate in Water?

How to Measure pH Levels

How to Reduce PH in Water

How to Standardize a pH Meter

Factors That Affect the pH of Water in Wetlands

How to Use Litmus Papers

How to Tell If a Sample of Water Is Pure or Mixed

Different Ways to Raise the pH of Drinking Water

Science Experiments on pH Levels

How to Measure for Acidity or Alkalinity

How Can pH Affect Your Fish?

The Average Rainfall in a Fresh Water Ecosystem

References

• Spababe.com: Baking Soda in Your Spa
• RawPeople.com: Alkaline Water and Weight Loss

About the Author

Heather Finch has been a freelance writer since the turn of the 21st century. Her official career began during her freshman year of college writing editorials about anything from manners to politics. Writings by Finch have appeared in the Western Herald, the Sturgis Journal and eHow.com. She has a bachelor's degree in creative writing and environmental studies.

To keep your pool water and equipment in top shape there are quite a few different levels you'll need to adjust. One of these is the pool "alkalinity" - which is a measure of dissolved alkaline substances in your water. Alkalinity tells us the water's ability to neutralize acid and closely tied to your pool's pH. 

Baking Soda is Sodium Bicarbonate

If your pool water alkalinity is lower than it should be, one way to increase it is to go to your local pool supply store and pick up a bottle of "alkalinity increaser." But did you know alkalinity increaser is just sodium bicarbonate?

If that term sounds familiar, it's because sodium bicarbonate is also known as baking soda.

That's right. Simple baking soda. And chances are, you can buy baking soda for quite a bit less money than what you'd spend on "alkalinity increaser."

So next time you're out grocery shopping, swing by the baking aisle and check out the prices on bulk baking soda. If there's a big sale going on, be sure to stock up! You'll get all the same benefits of a packaged "alkalinity increaser" at a reduced cost.

How much baking soda should I use?

One of the potential drawbacks of using baking soda instead of a specially-packaged alkalinity increaser is that baking soda doesn't come with pool use instructions. But don't let that stop you from using it.

To calculate how much baking soda you should add, first determine the amount of gallons of water in your pool. Then add 1.5 pounds of baking soda for every 10,000 gallons of water to increase the pool's total alkalinity by 10 ppm.

For example: If your pool holds 20,000 gallons of water and your test kit is showing you a total alkalinity of 50 ppm, you will want to raise your alkalinity a minimum of 30 ppm (recommended alkalinity levels are generally in the 80-120 ppm range). Since the pool in this example is 20,000 gallons, every three pounds of baking soda should raise alkalinity roughly 10 ppm, which is only a third of the level you need. This means you will need to add roughly nine pounds of baking soda to a 20,000 gallon pool to raise the alkalinity by 30 ppm and achieve the minimum alkalinity goal of 80 ppm.

Add the baking soda directly to the pool, let it dissolve and give it time to distribute through your pool's water (at minimum 20 minutes with your pump running), test, and add more baking soda if needed.

Baking Soda and pH Levels

Adding baking soda will also raise your pool's pH level some, but if your main goal is to raise the pH versus simply raising alkalinity, we recommend using soda ash (available at most pool supply stores) in lieu of baking soda. Adding six ounces of soda ash (sodium carbonate) to 10,000 gallons of water will raise the pH roughly 0.2, while adding the same amount of baking soda (sodium bicarbonate) will have a negligible effect on your pH.

Note that soda ash does also raise alkalinity along with pH. That six ounces of soda ash will raise your alkalinity by about 5 ppm, so only use soda ash if you want to raise alkalinity and pH. 

Soda Ash or Baking Soda?

• If you want to raise your pH and alkalinity together, use soda ash (sodium carbonate).
• If your goal is to raise alkalinity only, use baking soda (sodium bicarbonate).

With either solution, add in controlled doses. Test, add and adjust as needed. Too much of either and you risk throwing off your pool levels. 

Always Keep Your Water Chemistry Balanced

As with any chemicals you may add to your pool, your main goal should be to keep the pool's water chemistry balanced. Test your water regularly and make adjustments as needed. You'll find that a balanced pool is not only prettier and requires less cleaning, but is also an absolute joy to swim and relax in.

How long does it take for baking soda to raise alkalinity?

How much baking soda to increase alkalinity in hot tub?

Does baking soda increase alkaline?

How do you increase total alkalinity?