Where is the power button on HP Envy printer?

To turn off an HP Envy 6055 printer, simply find the power button, located on the back end of the printer over the power lead. Then, press the button for five or more seconds, and your printer should turn off. 

Refer to the diagram below to locate the power button labeled as “2”.

User Guide

Page 11
... and hold for at least three seconds to restore the network settings to the HP Smart app and your network. Buttons on the back of the printer (Power connection) Use only the power cord supplied by HP. (Power button) (USB port) (Wi-Fi button) Press to turn on or off the printer wireless capabilities of the printer for...

User Guide

Page 12
Function Complete product reset Restore factory defaults Button combination + Instruction A complete product reset will remove all your personal data, settings, and network information from the printer. With the cartridge access door open , press and hold the Power button for at least five seconds. With the cartridge access door open , press and hold the Wi-Fi and Power buttons for at least three seconds. 6 Chapter 1 Printer parts ENWW Restoring the printer to factory defaults will clear all settings and functions previously set up on the printer.

User Guide

Page 20
... page 111 after 2 hours of inactivity to help reduce energy use. Auto-Off This feature turns the printer off completely, so you must use the Power button to turn the printer back on.

User Guide

Page 31
... mobile device, make the setup process faster and easier on iOS, Android, Windows, and macOS devices. Make sure the printer is powered on page 38. 1. If this app, see Use the HP Smart app to print, copy, scan, and troubleshoot on . If it is in the Auto Wireless Connect (AWC) setup mode... app To set up using the HP Smart app You can use the HP Smart app to set up the printer, the printer is ready for setup and in AWC mode immediately after it has been longer than two hours, press and hold the Wireless button on your network. Follow the onscreen instructions...

User Guide

Page 62
... clean the printhead unnecessarily. Wait until all cartridges in the original sealed packages until they are transporting the printer, do the following tips help maintain HP cartridges and ensure consistent print quality. ● The instructions in this guide are for replacing cartridges, and are not intended for first time installation. ●... wastes ink and shortens the life of internal motion stop before unplugging the printer. ● Make sure you turn off the printer by pressing (the Power button).

User Guide

Page 70
If a cartridge is not in use. ● Press (the Power button) to turn the printer off a power strip. Wait until the power light turns off before unplugging the power cord or turning off using the Power button. ● Do not open or untape cartridges until print quality becomes unacceptable. You do not need ...as soon as possible. See Printing issues on page 60 for more information. ● When the Estimated Cartridge Levels screen in the HP Smart app or the Estimated Levels screen in the printer software shows one or both cartridges in the printer for extended periods of ...

User Guide

Page 89
...to move the carriage by hand. 5. To clear a paper jam from the rear of electrical shock, you must unplug the power cord to turn off the printer. Then disconnect the power cord from the cartridge access area 1. CAUTION: To avoid the risk of the printer. 2. If this guide 83 Use a ...flashlight to clear the jam manually. 2. Press (the Cancel button) to try to check for any jammed paper or foreign ...

User Guide

Page 100
...Print Document, and then click Yes to the ColorLok® standard. When you are ready to use HP Advanced Photo Paper. For best print quality, use high quality HP paper, or papers that adhere to confirm. For best results when printing images, use immediately. This ...prevents the photo paper from drying out, always turn the printer off using original HP cartridges. 2. b. When you are printing on ink consider replacing them. 5. If the cartridges are using the Power button. Align the cartridges. 94 Chapter 9 Solve a problem ENWW To clear the print queue ...

User Guide

Page 102
... Wireless indicator on the control panel is currently connected. For more information, see Open the HP printer software (Windows) on . ● From the printer control panel, press the Resume and (the Information button) at the same time to the same network as your printer again. - Also make... recommended steps listed in the printer is turned on. ● Check that the printer and the wireless router are turned on and have power. You can also see if something failed during the test. From the CURRENT CONFIGURATION section, find printer connection help, and then follow onscreen...

User Guide

Page 103
...your country/region or language, you might be directed to the HP Mobile Printing website in this website is blinking white on all the button lights, and then press and hold (the Information button) for at www.hp.com/go/ mobileprinting. For more information about troubleshooting wireless network ...one of this guide 97 ● To determine if a firewall or antivirus program is connected firmly to a functioning power outlet. For more information, visit the HP Mobile Printing website at least three seconds to turn on the printer control panel, make sure you are not able to...

User Guide

Page 111
Lift the scanner lid. (the Power button) and 2. Avoid cleaners that has been sprayed with a mild glass cleaner. Avoid isopropyl alcohol because it can slow down performance, degrade the quality of scans, ... is applied, the cleaner could leak under the scanner glass and damage the scanner. 3. Clean the scanner glass and lid backing by pressing unplugging the power cord from the electrical socket. 1. Close the scanner lid, and turn the printer off by using a soft, lint-free cloth that contain abrasives, acetone, benzene...

User Guide

Page 112
Clean the exterior WARNING! Keep fluids away from the printer control panel. 106 Chapter 9 Solve a problem ENWW Before cleaning the printer, turn the printer off by pressing the power cord from the electrical socket. (the Power button) and unplug Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the printer, as well as from the interior of the case.

User Guide

Page 113
... IP address) are removed. ENWW Restore original factory defaults and settings 107 TIP: You can help you correct many common printer problems. (Windows) Run the HP Print and Scan Doctor to expose the cartridge area. 2. The IP address is set back to the original factory defaults 1. The application is open, press... to change them back, you can restore the printer to the original network settings ● On the back of the printer for three seconds. (the Power button) and Wireless To restore the printer to the original factory settings or network settings.

User Guide

Page 137
...114 P paper clear jams 82 skewed pages 89 troubleshoot feeding 89 paper tray locating 2 paper-feed problems, troubleshoot 89 power troubleshoot 97 power input, locating 3 print diagnostic page 102 double-sided 50 specifications 115 troubleshoot 97 print quality report 102 printer control panel ...locating 2 printer software (Windows) about 40 opening 39, 40 printer status report information on 50 buttons, control panel 4 C Cartridge access door ...

Where is the power button on the HP Envy?

Where is the power button on the HP ENVY Pro printer?

Where is the power button on a HP ENVY 6455e?

Where is the off button on HP ENVY 6000 printer?